Anonymous
Apr 09, 2026
Rating: 5/5
Great MPU6050 Alternative
Works perfectly as a drop-in replacement. The noise levels are significantly lower than my old MPU6050 modules. Highly recommended for robotics projects.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Computer Hardware, Monitors & Peripherals |
| Origin | - |
| Interface Protocol | I2C, SPI |
| Axes Configuration | 6-Axis (Gyro + Accelerometer) |
| Operating Voltage | 1.71V to 3.6V |
| Gyroscope Range | ±125, ±250, ±500, ±1000, ±2000 dps |
| Accelerometer Range | ±2g, ±4g, ±8g, ±16g |
| Package Type | LGA-14 Land Grid Array |
| FIFO Buffer Size | 2048 bytes |
| Operating Temperature | -40°C to +85°C |
| Compatibility | BMI160, MPU6050 Footprint |
| Power Consumption | 650 µA (Normal Mode) |
Anonymous
Apr 09, 2026
Rating: 5/5
Great MPU6050 Alternative
Works perfectly as a drop-in replacement. The noise levels are significantly lower than my old MPU6050 modules. Highly recommended for robotics projects.
Anonymous
Apr 04, 2026
Rating: 4/5
Solid Performance
The sensor data is accurate and stable. Shipping took a bit longer than expected, but the product quality makes up for it.
Anonymous
Mar 19, 2026
Rating: 5/5
Low Power Draw
Battery life on my portable device improved noticeably after switching to this module. The low power modes work as advertised.
Anonymous
Feb 14, 2026
Rating: 5/5
Easy to Integrate
Used existing Arduino libraries with minor adjustments. SPI communication is stable and fast. Great value for the price.
Anonymous
Feb 13, 2026
Rating: 4/5
Good Sensor
Solid performance and easy to wire up. Documentation could be slightly more detailed regarding register maps, but overall a good purchase.
Q: Is this module compatible with 5V logic microcontrollers?
A: The module operates at 3.3V. If using a 5V microcontroller, please use a logic level shifter to prevent damage.
Q: Does the FIFO buffer overflow interrupt work reliably?
A: Yes, the 2KB FIFO buffer includes configurable watermark and overflow interrupts for efficient data handling.
Q: Are there ready-made libraries for ESP32?
A: Yes, several open-source libraries support this sensor on ESP32 via both I2C and SPI interfaces.
Q: What is the default I2C address for this module?
A: The default I2C address is 0x6A. It can be changed to 0x69 by pulling the AD0 pin high.
Q: Can this be used for drone flight stabilization?
A: Yes, the low latency and high update rate make it suitable for flight controller stabilization systems.