Anonymous
Apr 03, 2026
Rating: 3/5
Pinout confusing
The module works, but the diagram was hard to read. Had to search online forums to confirm the SDA and SCL wiring.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Computer Hardware, Monitors & Peripherals |
| Origin | - |
| Chipset Model | MPU9250 + BMP280 |
| Sensor Type | 10-DOF IMU + Barometer |
| Input Voltage | 3.3V to 5V DC |
| Interface Protocol | I2C and SPI |
| Gyro Scale | ±250, ±500, ±1000, ±2000 °/s |
| Accel Scale | ±2, ±4, ±8, ±16 g |
| Pressure Accuracy | ±0.12 hPa (±1m) |
| Operating Temp | -40°C to +85°C |
| PCB Size | 16mm x 12mm |
| Pin Header | 2.54mm Pitch 10-Pin |
Anonymous
Apr 03, 2026
Rating: 3/5
Pinout confusing
The module works, but the diagram was hard to read. Had to search online forums to confirm the SDA and SCL wiring.
Anonymous
Mar 27, 2026
Rating: 4/5
Good but needs calibration
Sensor works well once calibrated. The magnetometer took some time to set up correctly, but the pressure sensor is spot on.
Anonymous
Feb 17, 2026
Rating: 5/5
Excellent for robotics
Used this for my balancing robot project. The data is stable and the library support is widespread. Highly recommend for beginners.
Anonymous
Jan 30, 2026
Rating: 5/5
Perfect replacement
Replaced my old GY-80 module with this. The BMP280 is much more accurate than the old barometer. Very satisfied.
Anonymous
Jan 18, 2026
Rating: 5/5
Fast shipping
Arrived quickly and works as described. Packaging was secure and the pins were straight. No issues with my Arduino Uno.
Q: Can I use this with Raspberry Pi?
A: Yes, you can connect it via the GPIO I2C pins. Ensure you enable I2C in the Raspberry Pi configuration settings.
Q: What is the default I2C address?
A: The MPU9250 default address is 0x68 and the BMP280 default address is 0x76. These can be changed via hardware pins.
Q: Which Arduino library works best?
A: We recommend the Adafruit MPU9250 and Adafruit BMP280 libraries for the easiest integration and example code.
Q: Does this support 5V logic levels?
A: Yes, the module includes a voltage regulator and level shifting, so it is safe to use with 5V microcontrollers.
Q: Is the magnetometer pre-calibrated?
A: It comes with factory calibration, but we recommend performing soft iron and hard iron calibration for your specific environment.