Anonymous
Apr 14, 2026
Rating: 5/5
Brewing Essential
Use this for monitoring mash temperature. It is accurate enough for home brewing and cleans easily.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Computer Hardware, Monitors & Peripherals |
| Origin | - |
| Interface Protocol | 1-Wire |
| Temperature Range | -55°C to +125°C |
| Accuracy | ±0.5°C |
| Cable Length | 1 Meter |
| Supply Voltage | 3.0V to 5.5V |
| Probe Material | Stainless Steel |
| Waterproof Rating | IP68 |
| Resolution | 9 to 12-bit |
| Conversion Time | 750ms |
| Wire Configuration | 3-Wire (VCC, GND, Data) |
Anonymous
Apr 14, 2026
Rating: 5/5
Brewing Essential
Use this for monitoring mash temperature. It is accurate enough for home brewing and cleans easily.
Anonymous
Mar 27, 2026
Rating: 4/5
Good Sensor
Accurate and easy to wire up to my Arduino. The cable is a bit stiff but manageable for my setup.
Anonymous
Mar 16, 2026
Rating: 5/5
Perfect for Aquarium
Works great in my saltwater tank. The waterproofing is solid and readings are consistent with my glass thermometer.
Anonymous
Feb 12, 2026
Rating: 3/5
Needs Resistor
Works well but remember you need a pull-up resistor. I missed that at first and thought it was broken.
Anonymous
Jan 23, 2026
Rating: 5/5
Arduino Compatible
Easy to integrate using the OneWire library. No issues with stability over the last month of use.
Q: What are the wire color codes?
A: Typically Red is VCC, Black is GND, and Yellow or White is the Data line. Please check your specific batch.
Q: Can this measure air temperature as well?
A: Yes, it can measure air temperature, but response time may be slower compared to liquid immersion.
Q: Does the package include a pull-up resistor?
A: No, the package includes the sensor and cable only. A 4.7k ohm resistor is required for operation.
Q: Is this compatible with Raspberry Pi?
A: Yes, this sensor is fully compatible with Raspberry Pi GPIO pins using the 1-Wire protocol.
Q: What is the maximum water depth this can handle?
A: With an IP68 rating, it is suitable for continuous submersion in water under typical aquarium or tank pressures.