Anonymous
Apr 08, 2026
Rating: 5/5
Reliable CCS811 Breakout
Clean board layout. I2C addresses are configurable which is a huge plus for multiple sensors on the same bus.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Computer Hardware, Monitors & Peripherals |
| Origin | - |
| Operating Voltage | 1.8V to 3.3V DC |
| Communication Interface | I2C and UART |
| CO2 Measurement Range | 400 to 8192 ppm |
| TVOC Measurement Range | 0 to 1187 ppb |
| Operating Temperature | -40°C to 85°C |
| Operating Humidity | 10% to 95% RH (non-condensing) |
| Module Dimensions | 13mm x 13mm x 2mm |
| Initial Warm-up Time | 20 minutes |
| Average Current Consumption | Approx. 100mA during measurement |
| PCB Material | FR-4 with Gold Plated Pins |
Anonymous
Apr 08, 2026
Rating: 5/5
Reliable CCS811 Breakout
Clean board layout. I2C addresses are configurable which is a huge plus for multiple sensors on the same bus.
Anonymous
Mar 29, 2026
Rating: 5/5
Great for monitoring
Using this in my greenhouse controller. VOC and CO2 data helps optimize ventilation schedules effectively.
Anonymous
Feb 22, 2026
Rating: 3/5
Hard to find libraries
The hardware is fine, but finding compatible libraries for my specific IDE took some time. Documentation could be clearer.
Anonymous
Feb 11, 2026
Rating: 5/5
Perfect for IoT Projects
Integrated easily with my ESP32. Readings seem consistent compared to my reference meter. Great value for the price.
Anonymous
Feb 05, 2026
Rating: 4/5
Good sensor, patience needed
Works well but requires the initial burn-in time. Once calibrated, data is stable. Would recommend for home automation.
Q: How long does the sensor last?
A: The expected lifespan is typically around 10 years under normal operating conditions.
Q: Does it measure actual temperature or just compensate?
A: It has an internal temperature sensor for compensation, but external compensation is recommended for higher accuracy.
Q: Can I use this outdoors?
A: It is not weatherproof. You would need an enclosure to protect it from rain and dust for outdoor use.
Q: Is this compatible with 5V Arduino boards?
A: Yes, but logic level shifting is recommended as the sensor operates at 3.3V to prevent damage.
Q: What is the default I2C address?
A: The default I2C address is 0x5A, but it can be changed via hardware pins on the module.