Anonymous
Feb 12, 2026
Rating: 4/5
Solid hardware
Hardware is robust. Wish the documentation was clearer on calibration steps.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Computer Hardware, Monitors & Peripherals |
| Origin | - |
| Interface | UART TTL Serial |
| Sensor Axes | 9-Axis (Accel + Gyro + Mag) |
| Accelerometer Range | ±16g Configurable |
| Gyroscope Range | ±2000 degrees/s |
| Magnetometer | Integrated Electronic Compass |
| Storage Interface | Micro SD Card Slot |
| Supported Card Size | Up to 32GB FAT32 |
| Supply Voltage | 3.3V to 5.0V DC |
| Operating Temperature | -40°C to +85°C |
| Communication Protocol | ASCII / Modbus RTU |
Anonymous
Feb 12, 2026
Rating: 4/5
Solid hardware
Hardware is robust. Wish the documentation was clearer on calibration steps.
Anonymous
Feb 01, 2026
Rating: 5/5
Excellent for data logging
The SD card feature saves so much time during field tests. No need for tethered connections.
Anonymous
Jan 28, 2026
Rating: 4/5
Good value sensor
Accuracy is decent for the price. Setup took a little while but works well now.
Anonymous
Jan 25, 2026
Rating: 5/5
Easy to integrate
UART connection was straightforward with my microcontroller. Data stream is stable.
Anonymous
Jan 25, 2026
Rating: 5/5
Perfect for UAVs
Lightweight and logs attitude perfectly. Exactly what I needed for my drone project.
Q: What is the maximum sampling rate?
A: The module supports output frequencies up to 200Hz depending on configuration.
Q: Is this compatible with Raspberry Pi?
A: Yes, it is compatible via UART GPIO pins. Ensure voltage levels match.
Q: Can I read data while logging to SD?
A: Yes, the module supports simultaneous data output and SD card logging.
Q: Is the casing waterproof?
A: No, the standard module is not waterproof. Please use an external enclosure for outdoor use.
Q: Does it log automatically on power up?
A: Yes, if configured to do so via the command set. Default settings may vary.