Attributes

Brand	-
Category	Industrial Small Parts / Bearings & Bushings
Origin	-
Material	Carbon Steel
Inner Diameter	25 mm
Outer Diameter	32 mm
Flange Diameter	40 mm
Total Length	50 mm
Flange Thickness	5 mm
Surface Finish	Polished
Hardness	HRC 50-55
Tolerance Class	H7/g6
Package Content	1 Piece

5 reviews

Anonymous

Apr 06, 2026

Rating: 5/5

Perfect fit for guide pillars

These bushings fit exactly as specified. The inner diameter matches my 25mm shaft perfectly with minimal play. Great quality steel.

Anonymous

Mar 17, 2026

Rating: 4/5

Good quality, slight oil residue

The build quality is solid and hardness seems accurate. Arrived with some protective oil which is expected but needed cleaning before install.

Anonymous

Mar 13, 2026

Rating: 5/5

Accurate dimensions

I measured the ID and OD with calipers upon arrival. Everything is within the stated tolerance. Very satisfied with the precision.

Anonymous

Mar 07, 2026

Rating: 4/5

Solid choice for repairs

Replaced worn-out bushings in an old press. These fit well and the flange provides good stability. Shipping was fast too.

Anonymous

Feb 07, 2026

Rating: 5/5

Durable for high load

Using these in a machinery setup with moderate load. They have held up well over several months of continuous operation without wear.

5 FAQ

Q: Can these be pressed into an aluminum housing?

A: Yes, they can be pressed into aluminum housings provided the outer diameter tolerance matches your housing bore specifications.

Q: Are these sold in bulk packs or individually?

A: This listing is for a single piece. Please contact us directly if you require bulk quantities for industrial projects.

Q: Do these bushings require additional lubrication during installation?

A: Yes, we recommend applying standard machine oil or grease to the inner and outer surfaces before installation to ensure smooth operation.

Q: What is the maximum operating temperature for these steel sleeves?

A: These carbon steel bushings can typically operate safely up to 150 degrees Celsius under standard load conditions.

Q: Is the 25mm ID suitable for a h7 tolerance shaft?

A: Yes, these bushings are designed with an inner tolerance compatible with h7 shafts for a standard sliding fit.

Explore your interests

WWI Anrui Motor Deep Groove Ball Bearings 6200, 6201, 6202, 6203, 6204-ZZ 2RZ High-Speed Quiet

$40.00

Domestic Bearing Steel Linear Guide Rail Block MGN12H 9H 7H 15H MGW7C 9C 12C 15CS

$4.50

Automotive Inspection Fixture Standard Parts Round Liner Shaft Bushing Straight Sleeve Threaded Sleeve Guide Bushing Inspection Pin Sleeve In Stock

$3.00

304 Stainless Steel Cross Recessed Indented External Hex Bolts GB29.2 External Hex Screws M3 M4 M5 M6

$1.00

304 Stainless Steel Hex Socket Screw Cup Head Bolt Cylinder Head Extended M2 M2.5 M3 M4 M5 M6 M8 M10mm

$1.43

Real Photo EZO Imported Stainless Steel Bearing 608HZZ 8*22*7mm S608ZZ High Speed

$13.50

SWC Light/Heavy Duty Cross Shaft Universal Coupling, Universal Shaft, Drive Shaft, and Universal Joint

$220.00

T-Shaped Rubber Hexagonal Spider Coupling Elastic Block Polyurethane Buffer Pad Water Pump Shock Absorber Toughened Hex Pad

$5.00

Stainless Steel Bushings (Inner Dia: 2/2.5mm, Outer Dia: 4/5/6mm), Steel Guide Sleeves, Wear-Resistant Liners, Miniature Spacers

$2.00

Thickened Flange Nut with Washer, High-Strength Alloy Steel Press Plate Screw Nut M8-M36

$3.40

[M2-M20] Stainless Steel Spring Washer

$0.76

$Rubber Gear Coupling 14J\13J\12J\11J\10J\9J\8J\7J\6J\5J\4J\3J$

Rubber Gear Coupling 14J\13J\12J\11J\10J\9J\8J\7J\6J\5J\4J\3J

$15.00

Sunroom Column Base Steel Casting Embedded Parts 80 100 120 150 Special Square Tube Base Connector

$6.03

Nickel-Plated/Black PB Pan Head Flat Point Self-Tapping Screw, Cross Recessed Small Screw M1-M4

$1.00

Box-Type Shaft Slider Linear Bearing SCS8 10 12 13 16 20 25 30 35 40 50 60UU

$6.40

Maintenance-Free Plastic Linear Bearing Slide Bushing LM1016230450UU (igus Alternative)

$6.36

Non-Standard BFH Aluminum Alloy Bearing Housing with Retaining Ring, Round Flange, Single Bearing Fixed Mount BARA BFF23

$16.90

Hardened Bearing Steel Bushing, Wear-Resistant Liner, High-Precision Guide Sleeve, Collar, and Spacer Set

$3.69

Imported Bearing Model Assortment: 6000RS, 6001 High-Speed, 6002 Motor, 6003, 6004, 6005, 6006

$2.50

25mm Round Stainless Steel Pipe Connector, Clothes Drying Rack Accessory, Display Stand Fastener, Shelf Fixing Two-Way Joint

$1.20

Miniature Ball Bearings with Shoulder Flange Catalog - Inner Diameters 2 3 4 5 6 7 8 9 10

$13.00

L-Type Jaw Coupling, Spider Coupling, High Torque, Black Oxide Finish, Free Shipping from Manufacturer

$7.00

Japan EKI LM3 4 5 6 8 10 12 16 20 25 30 35 40 50UU Imported Linear Bearing

$10.50

Japanese Precision Imported NSK Linear Bearing LM 3 4 5 6 8 10 12 13 16 20 25 30 UU

$6.50

304 Stainless Steel Countersunk Hex Socket Screw and Nut Set with Flat and Spring Washers

$1.29

Grade 12.9 External Hex Screws and Nuts Complete Set High-Strength Bolts with Flat and Spring Washers M6-M24

$9.03

304 Stainless Steel Nuts, Caps, Flat Washers, and Spring Washers - Sizes M3, M4, M5, M6, M8, M10, M12, M16, M18, M20, M22, M24, M30

$1.00

C&U Bearings for Automotive Alternators - SA608, 6201, 6202, 6302, 6303, 6304/2RSM/C3

$3.50

Plastic Hammer Head Nut M8 M10 Furniture Connector Embedded Fastener Hardware Accessories

$5.11

Swing Cylinder Front Bucket Bushing 95*110*80 with TOM Oil Bronze Bushing for Excavator and Large Loader Liners

$90.00

304 Stainless Steel Rivet Nuts, Aluminum Flat Head Rivnuts, Countersunk Rivet Nuts Assortment M3 M4 M5 M6 M8 M10

$0.91

Stainless Steel Angle Bracket 90-Degree L-Shaped Fixator Corner Iron Right-Angle Triangle Support Shelf Bracket Hardware Connector Plate T

$2.66

Aluminum Alloy Socket Head Cap Screw, Cup Head Fastener M4-M10mm

$7.00

Galvanized High-Strength Imperial Hex Flange Nuts UNC Grade 8, Anti-Slip Locking; UNF Fine Thread Nuts

$2.20

M3-M20 PVC External Hex Head Screws, Gray Insulated Bolts, Acid and Alkali Resistant Plastic Fasteners

$2.64

NSK High-Speed Imported Micro Bearings 605 606 607 608 609 ZZ Z1 Z2 Z3 Z4

$3.00

Aluminum Alloy Shaft Bushing, Washer, Tube Sleeve, Spacer Column, Casing, Flat Gasket, Retaining Ring, Aluminum Joint Sleeve M2 M3 M4 M5 M8-m12

$9.00

Phone Gimbal Shim, Screw Plate, Heavy-Duty Clamp Shim, Internal 1/4" Screw Pad, Nut Washer, Anti-Slip Fixation Pad

$2.80

304 Stainless Steel Extended Cylindrical Sleeve Shaft Bushing Non-Threaded Spacer Hollow Liner M2 M3 M4 M5

$1.66

Guwanji Zinc-Plated Iron Cross Countersunk Screw, Nut, Flat Head Bolt, and Spring Washer Assortment M2-M12

$1.82