Attributes

Brand	-
Category	Industrial Small Parts / Bearings & Bushings
Origin	-
Material Composition	Oil-Impregnated Bronze Composite
Product Series	SF Series
Inner Diameter Options	16mm, 17mm, 18mm, 20mm
Outer Diameter Options	20mm, 21mm, 22mm, 24mm
Length Range	15mm to 50mm
Lubrication Type	Self-Lubricating (Oil-Free)
Dynamic Load Capacity	30 N/mm²
Max Sliding Speed	2.5 m/s
Operating Temperature	-10°C to +80°C
Surface Hardness	60 HB

5 reviews

Anonymous

Apr 25, 2026

Rating: 5/5

Fast shipping and well packed

Arrived earlier than expected. Each piece was individually wrapped to prevent damage. The 20mm size works great for my project.

Anonymous

Apr 21, 2026

Rating: 4/5

Works well for agricultural repair

Replaced old bushings on a tractor linkage. They handle the dust and vibration well. Would buy again when needed.

Anonymous

Mar 31, 2026

Rating: 4/5

Good quality, tight tolerance

The bronze quality is excellent. They were a bit tight on installation so I had to hone them slightly, but once in, they run very smooth.

Anonymous

Mar 27, 2026

Rating: 5/5

Perfect fit for my lathe

Ordered the 18mm ID bushings and they fit the shaft perfectly. The self-lubricating feature saves me time on maintenance. Highly recommend for light industrial use.

Anonymous

Feb 20, 2026

Rating: 5/5

Durable and reliable

Using these in a conveyor system for three months now. No wear visible yet and no squeaking. Great value for the price point.

5 FAQ

Q: Can these withstand temperatures above 100°C?

A: No, the maximum operating temperature is 80°C. Higher temperatures may degrade the oil impregnation.

Q: Are these sold individually or in packs?

A: These are sold in packs of 10 pieces per standard package. Custom quantities may be available upon request.

Q: What shaft tolerance do you recommend for the 16mm ID?

A: We recommend a shaft tolerance of h9 for optimal fit and performance with this series.

Q: Do I need to add grease to these bushings during installation?

A: No, these are self-lubricating oil-impregnated bushings. Adding external grease is not required and may clog the pores.

Q: Can I cut these bushings to a custom length?

A: Yes, they can be cut to length. Please ensure you deburr the edges after cutting to prevent shaft damage.

Explore your interests

Japan BPJ Imported Deep Groove Ball Bearings 6006 6007 6008 6009 6010 6011 ZZ RS P4

$23.31

PNY8LMK10 12 13 16 20 25 30 35 40LUU50 Extended Square Flange Linear Bearing Imported

$37.00

45# Medium Carbon Steel Straight Guide Bushing: Inner Diameter D10-D50, Shoulderless Straight Liner, Bushing, Steel Sleeve

$1.00

304 Stainless Steel Cross Recessed Indented External Hex Bolts GB29.2 External Hex Screws M3 M4 M5 M6

$1.00

304 Stainless Steel Hex Socket Screw Cup Head Bolt Cylinder Head Extended M2 M2.5 M3 M4 M5 M6 M8 M10mm

$1.43

German Imported YLV 304 Stainless Steel Corrosion-Resistant Bearings S6800/6801/6802/6803/6804/6805

$5.80

SWC Light/Heavy Duty Cross Shaft Universal Coupling, Universal Shaft, Drive Shaft, and Universal Joint

$220.00

T-Shaped Rubber Hexagonal Spider Coupling Elastic Block Polyurethane Buffer Pad Water Pump Shock Absorber Toughened Hex Pad

$5.00

Stainless Steel Bushings (Inner Dia: 2/2.5mm, Outer Dia: 4/5/6mm), Steel Guide Sleeves, Wear-Resistant Liners, Miniature Spacers

$2.00

Thickened Flange Nut with Washer, High-Strength Alloy Steel Press Plate Screw Nut M8-M36

$3.40

[M2-M20] Stainless Steel Spring Washer

$0.76

$Rubber Gear Coupling 14J\13J\12J\11J\10J\9J\8J\7J\6J\5J\4J\3J$

Rubber Gear Coupling 14J\13J\12J\11J\10J\9J\8J\7J\6J\5J\4J\3J

$15.00

Sunroom Column Base Steel Casting Embedded Parts 80 100 120 150 Special Square Tube Base Connector

$6.03

Nickel-Plated/Black PB Pan Head Flat Point Self-Tapping Screw, Cross Recessed Small Screw M1-M4

$1.00

Imported Extended Square Flange Linear Bearing Electroplated Rust-Resistant LMK8 10 16 20 25 30 35 40LUU

$12.20

Linear Shaft Guide Box-Type Slider Linear Bearing Steel Retainer Bronze Bushing SC8 12 13 16 22 53 35 45 0UU

$3.80

Guide Shaft Support Open-Type Flange Bearing Housing STHWRB Smooth Shaft Fixed Support GBJ Series Shaft Support

$11.00

Hardened Bearing Steel Bushing, Wear-Resistant Liner, High-Precision Guide Sleeve, Collar, and Spacer Set

$3.69

Imported Bearing Model Assortment: 6000RS, 6001 High-Speed, 6002 Motor, 6003, 6004, 6005, 6006

$2.50

25mm Round Stainless Steel Pipe Connector, Clothes Drying Rack Accessory, Display Stand Fastener, Shelf Fixing Two-Way Joint

$1.20

Miniature Ball Bearings with Shoulder Flange Catalog - Inner Diameters 2 3 4 5 6 7 8 9 10

$13.00

L-Type Jaw Coupling, Spider Coupling, High Torque, Black Oxide Finish, Free Shipping from Manufacturer

$7.00

MYT Meiyate Square Flange Linear Bearing LMK6 8 10 12 13 16 20AUU/LAUU Nickel-Plated Rust-Proof

$13.80

Extended Box-Type Slider Bearing Linear Rail SCS8 10 12 13 16 20 25 35 40 5060LUU

$6.80

304 Stainless Steel Countersunk Hex Socket Screw and Nut Set with Flat and Spring Washers

$1.29

Grade 12.9 External Hex Screws and Nuts Complete Set High-Strength Bolts with Flat and Spring Washers M6-M24

$9.03

304 Stainless Steel Nuts, Caps, Flat Washers, and Spring Washers - Sizes M3, M4, M5, M6, M8, M10, M12, M16, M18, M20, M22, M24, M30

$1.00

C&U Bearings for Automotive Alternators - SA608, 6201, 6202, 6302, 6303, 6304/2RSM/C3

$3.50

Plastic Hammer Head Nut M8 M10 Furniture Connector Embedded Fastener Hardware Accessories

$5.11

Multi-Spec Large Lubricated Copper Shaft Bushings - Centrifugal Cast Oil-Free Sleeves and Blank Bushings

$94.90

304 Stainless Steel Rivet Nuts, Aluminum Flat Head Rivnuts, Countersunk Rivet Nuts Assortment M3 M4 M5 M6 M8 M10

$0.91

Stainless Steel Angle Bracket 90-Degree L-Shaped Fixator Corner Iron Right-Angle Triangle Support Shelf Bracket Hardware Connector Plate T

$2.66

Aluminum Alloy Socket Head Cap Screw, Cup Head Fastener M4-M10mm

$7.00

Galvanized High-Strength Imperial Hex Flange Nuts UNC Grade 8, Anti-Slip Locking; UNF Fine Thread Nuts

$2.20

M3-M20 PVC External Hex Head Screws, Gray Insulated Bolts, Acid and Alkali Resistant Plastic Fasteners

$2.64

NSK High-Speed Imported Micro Bearings 605 606 607 608 609 ZZ Z1 Z2 Z3 Z4

$3.00

Aluminum Alloy Shaft Bushing, Washer, Tube Sleeve, Spacer Column, Casing, Flat Gasket, Retaining Ring, Aluminum Joint Sleeve M2 M3 M4 M5 M8-m12

$9.00

Phone Gimbal Shim, Screw Plate, Heavy-Duty Clamp Shim, Internal 1/4" Screw Pad, Nut Washer, Anti-Slip Fixation Pad

$2.80

Injection Molding Machine Parts ~ Large Pin Shaft ~ All Sizes Available ~ Steel Sleeve Matching ~ Bushing ~ Pin Shafts for All Models

$70.00

Guwanji Zinc-Plated Iron Cross Countersunk Screw, Nut, Flat Head Bolt, and Spring Washer Assortment M2-M12

$1.82