Anonymous
Apr 12, 2026
Rating: 5/5
High quality bronze
Solid construction and good oil retention. I use these in a high-cycle linkage system and they have held up well over the past six months without excessive wear.
Description
Reviews
| Brand | - |
| Category | Industrial Small Parts / Bearings & Bushings |
| Origin | - |
| Material Composition | SAE 841 Oil-Impregnated Bronze |
| Inner Diameter | 0.500 inches (12.7 mm) |
| Outer Diameter | 0.625 inches (15.875 mm) |
| Overall Length | 1.000 inches (25.4 mm) |
| Lubrication Type | Self-Lubricating (Oil-Impregnated) |
| Max Operating Temperature | 220°F (104°C) |
| Dynamic Load Capacity | 2,000 PSI |
| Hardness Rating | HRB 60 Minimum |
| Surface Finish | Machined and Honed |
| Primary Application | Motor Shafts, Punch Presses, Linkages |
Anonymous
Apr 12, 2026
Rating: 5/5
High quality bronze
Solid construction and good oil retention. I use these in a high-cycle linkage system and they have held up well over the past six months without excessive wear.
Anonymous
Mar 21, 2026
Rating: 5/5
Great for motor shafts
Running smooth on my motor shaft application. The self-lubricating feature is a huge plus for maintenance reduction. Highly recommend for similar setups.
Anonymous
Mar 04, 2026
Rating: 5/5
Bulk order satisfied
Ordered fifty units for our assembly line. Consistent quality across all pieces. No defects found and our technicians had no issues installing them.
Anonymous
Feb 25, 2026
Rating: 5/5
Perfect fit for my lathe
Exactly what I needed for my older lathe restoration. The dimensions were spot on and the bronze quality feels solid. Installation was straightforward with a light press fit.
Anonymous
Feb 20, 2026
Rating: 4/5
Good but tight fit
The quality is excellent, but the inner diameter was slightly tight for my shaft. I had to do some light reaming to get the perfect clearance. Otherwise, great product.
Q: Do I need to add oil during installation?
A: While the bushings are oil-impregnated, we recommend applying a light coat of machine oil during installation to ensure initial lubrication and prevent galling.
Q: What is the tolerance on the inner diameter?
A: The inner diameter follows standard sintered bronze tolerances, typically +0.001/-0.000 inches. Please measure your shaft for proper clearance fit.
Q: Can this be used outdoors in wet conditions?
A: Bronze offers good corrosion resistance, but for prolonged outdoor exposure in wet conditions, we recommend additional protective measures or regular maintenance.
Q: Is this compatible with stainless steel shafts?
A: Yes, these bronze bushings work well with hardened steel and stainless steel shafts. Ensure the shaft surface finish is smooth to maximize bushing life.
Q: Is this suitable for high-speed applications?
A: Yes, these bushings are designed for moderate to high-speed applications within the specified PV limits. Please consult the load capacity chart for specific RPM recommendations.