Attributes

Brand	-
Category	Industrial Small Parts / Bearings & Bushings
Origin	-
Material Composition	SAE 841 Oil-Impregnated Bronze
Inner Diameter	0.500 inches (12.7 mm)
Outer Diameter	0.625 inches (15.875 mm)
Overall Length	1.000 inches (25.4 mm)
Lubrication Type	Self-Lubricating (Oil-Impregnated)
Max Operating Temperature	220°F (104°C)
Dynamic Load Capacity	2,000 PSI
Hardness Rating	HRB 60 Minimum
Surface Finish	Machined and Honed
Primary Application	Motor Shafts, Punch Presses, Linkages

5 reviews

Anonymous

Apr 12, 2026

Rating: 5/5

High quality bronze

Solid construction and good oil retention. I use these in a high-cycle linkage system and they have held up well over the past six months without excessive wear.

Anonymous

Mar 21, 2026

Rating: 5/5

Great for motor shafts

Running smooth on my motor shaft application. The self-lubricating feature is a huge plus for maintenance reduction. Highly recommend for similar setups.

Anonymous

Mar 04, 2026

Rating: 5/5

Bulk order satisfied

Ordered fifty units for our assembly line. Consistent quality across all pieces. No defects found and our technicians had no issues installing them.

Anonymous

Feb 25, 2026

Rating: 5/5

Perfect fit for my lathe

Exactly what I needed for my older lathe restoration. The dimensions were spot on and the bronze quality feels solid. Installation was straightforward with a light press fit.

Anonymous

Feb 20, 2026

Rating: 4/5

Good but tight fit

The quality is excellent, but the inner diameter was slightly tight for my shaft. I had to do some light reaming to get the perfect clearance. Otherwise, great product.

5 FAQ

Q: Do I need to add oil during installation?

A: While the bushings are oil-impregnated, we recommend applying a light coat of machine oil during installation to ensure initial lubrication and prevent galling.

Q: What is the tolerance on the inner diameter?

A: The inner diameter follows standard sintered bronze tolerances, typically +0.001/-0.000 inches. Please measure your shaft for proper clearance fit.

Q: Can this be used outdoors in wet conditions?

A: Bronze offers good corrosion resistance, but for prolonged outdoor exposure in wet conditions, we recommend additional protective measures or regular maintenance.

Q: Is this compatible with stainless steel shafts?

A: Yes, these bronze bushings work well with hardened steel and stainless steel shafts. Ensure the shaft surface finish is smooth to maximize bushing life.

Q: Is this suitable for high-speed applications?

A: Yes, these bushings are designed for moderate to high-speed applications within the specified PV limits. Please consult the load capacity chart for specific RPM recommendations.

Explore your interests

Japan BPJ Imported Deep Groove Ball Bearings 6006 6007 6008 6009 6010 6011 ZZ RS P4

$23.31

PNY8LMK10 12 13 16 20 25 30 35 40LUU50 Extended Square Flange Linear Bearing Imported

$37.00

45# Medium Carbon Steel Straight Guide Bushing: Inner Diameter D10-D50, Shoulderless Straight Liner, Bushing, Steel Sleeve

$1.00

304 Stainless Steel Cross Recessed Indented External Hex Bolts GB29.2 External Hex Screws M3 M4 M5 M6

$1.00

304 Stainless Steel Hex Socket Screw Cup Head Bolt Cylinder Head Extended M2 M2.5 M3 M4 M5 M6 M8 M10mm

$1.43

German Imported YLV 304 Stainless Steel Corrosion-Resistant Bearings S6800/6801/6802/6803/6804/6805

$5.80

SWC Light/Heavy Duty Cross Shaft Universal Coupling, Universal Shaft, Drive Shaft, and Universal Joint

$220.00

T-Shaped Rubber Hexagonal Spider Coupling Elastic Block Polyurethane Buffer Pad Water Pump Shock Absorber Toughened Hex Pad

$5.00

Stainless Steel Bushings (Inner Dia: 2/2.5mm, Outer Dia: 4/5/6mm), Steel Guide Sleeves, Wear-Resistant Liners, Miniature Spacers

$2.00

Thickened Flange Nut with Washer, High-Strength Alloy Steel Press Plate Screw Nut M8-M36

$3.40

[M2-M20] Stainless Steel Spring Washer

$0.76

$Rubber Gear Coupling 14J\13J\12J\11J\10J\9J\8J\7J\6J\5J\4J\3J$

Rubber Gear Coupling 14J\13J\12J\11J\10J\9J\8J\7J\6J\5J\4J\3J

$15.00

Sunroom Column Base Steel Casting Embedded Parts 80 100 120 150 Special Square Tube Base Connector

$6.03

Nickel-Plated/Black PB Pan Head Flat Point Self-Tapping Screw, Cross Recessed Small Screw M1-M4

$1.00

Imported Extended Square Flange Linear Bearing Electroplated Rust-Resistant LMK8 10 16 20 25 30 35 40LUU

$12.20

Linear Shaft Guide Box-Type Slider Linear Bearing Steel Retainer Bronze Bushing SC8 12 13 16 22 53 35 45 0UU

$3.80

Guide Shaft Support Open-Type Flange Bearing Housing STHWRB Smooth Shaft Fixed Support GBJ Series Shaft Support

$11.00

Hardened Bearing Steel Bushing, Wear-Resistant Liner, High-Precision Guide Sleeve, Collar, and Spacer Set

$3.69

Imported Bearing Model Assortment: 6000RS, 6001 High-Speed, 6002 Motor, 6003, 6004, 6005, 6006

$2.50

25mm Round Stainless Steel Pipe Connector, Clothes Drying Rack Accessory, Display Stand Fastener, Shelf Fixing Two-Way Joint

$1.20

Miniature Ball Bearings with Shoulder Flange Catalog - Inner Diameters 2 3 4 5 6 7 8 9 10

$13.00

L-Type Jaw Coupling, Spider Coupling, High Torque, Black Oxide Finish, Free Shipping from Manufacturer

$7.00

MYT Meiyate Square Flange Linear Bearing LMK6 8 10 12 13 16 20AUU/LAUU Nickel-Plated Rust-Proof

$13.80

Extended Box-Type Slider Bearing Linear Rail SCS8 10 12 13 16 20 25 35 40 5060LUU

$6.80

304 Stainless Steel Countersunk Hex Socket Screw and Nut Set with Flat and Spring Washers

$1.29

Grade 12.9 External Hex Screws and Nuts Complete Set High-Strength Bolts with Flat and Spring Washers M6-M24

$9.03

304 Stainless Steel Nuts, Caps, Flat Washers, and Spring Washers - Sizes M3, M4, M5, M6, M8, M10, M12, M16, M18, M20, M22, M24, M30

$1.00

C&U Bearings for Automotive Alternators - SA608, 6201, 6202, 6302, 6303, 6304/2RSM/C3

$3.50

Plastic Hammer Head Nut M8 M10 Furniture Connector Embedded Fastener Hardware Accessories

$5.11

Multi-Spec Large Lubricated Copper Shaft Bushings - Centrifugal Cast Oil-Free Sleeves and Blank Bushings

$94.90

304 Stainless Steel Rivet Nuts, Aluminum Flat Head Rivnuts, Countersunk Rivet Nuts Assortment M3 M4 M5 M6 M8 M10

$0.91

Stainless Steel Angle Bracket 90-Degree L-Shaped Fixator Corner Iron Right-Angle Triangle Support Shelf Bracket Hardware Connector Plate T

$2.66

Aluminum Alloy Socket Head Cap Screw, Cup Head Fastener M4-M10mm

$7.00

Galvanized High-Strength Imperial Hex Flange Nuts UNC Grade 8, Anti-Slip Locking; UNF Fine Thread Nuts

$2.20

M3-M20 PVC External Hex Head Screws, Gray Insulated Bolts, Acid and Alkali Resistant Plastic Fasteners

$2.64

NSK High-Speed Imported Micro Bearings 605 606 607 608 609 ZZ Z1 Z2 Z3 Z4

$3.00

Aluminum Alloy Shaft Bushing, Washer, Tube Sleeve, Spacer Column, Casing, Flat Gasket, Retaining Ring, Aluminum Joint Sleeve M2 M3 M4 M5 M8-m12

$9.00

Phone Gimbal Shim, Screw Plate, Heavy-Duty Clamp Shim, Internal 1/4" Screw Pad, Nut Washer, Anti-Slip Fixation Pad

$2.80

Injection Molding Machine Parts ~ Large Pin Shaft ~ All Sizes Available ~ Steel Sleeve Matching ~ Bushing ~ Pin Shafts for All Models

$70.00

Guwanji Zinc-Plated Iron Cross Countersunk Screw, Nut, Flat Head Bolt, and Spring Washer Assortment M2-M12

$1.82