Anonymous
Apr 04, 2026
Rating: 4/5
Good Product
Slightly oily packaging as expected for this material, but the part itself is high quality. Took off one star because shipping took a bit longer than expected.
Description
Reviews
| Brand | - |
| Category | Industrial Small Parts / Bearings & Bushings |
| Origin | - |
| Material Composition | SAE 841 Powdered Metal Bronze |
| Manufacturing Process | Powder Metallurgy Sintering |
| Lubrication Type | Self-Lubricating Oil Impregnated |
| Inner Diameter Range | 3 mm to 60 mm |
| Outer Diameter Range | 12 mm to 16 mm |
| Hardness Rating | 35 HRB Minimum |
| Apparent Density | 6.4 g/cm³ Typical |
| Operating Temperature | -10°C to 100°C |
| Surface Finish | Smooth Bore Interior |
| Bushing Style | Thin-Wall Sleeve Bushing |
Anonymous
Apr 04, 2026
Rating: 4/5
Good Product
Slightly oily packaging as expected for this material, but the part itself is high quality. Took off one star because shipping took a bit longer than expected.
Anonymous
Mar 17, 2026
Rating: 4/5
Works Well
Fits standard shafts nicely. Make sure to measure your housing carefully before ordering. The oil impregnation is visible which is a good sign.
Anonymous
Mar 06, 2026
Rating: 5/5
Perfect Fit for Motor
Replaced the old bushing in my electric motor with this one. The sizing was accurate and it slid in smoothly with a light press. Machine runs quietly now.
Anonymous
Feb 05, 2026
Rating: 5/5
Fast Service
Arrived within days and was well protected in the box. No damage to the bushing edges. Exactly what I needed for my project.
Anonymous
Feb 01, 2026
Rating: 5/5
Great Quality
Very durable material. I use these for various DIY machinery repairs and they hold up well under moderate load. Will buy again.
Q: Can this bearing be used in outdoor applications?
A: Yes, bronze is corrosion resistant, but we recommend protecting it from direct exposure to harsh chemicals or saltwater.
Q: Is this material magnetic?
A: No, bronze is a non-ferrous metal and is not magnetic, making it suitable for sensitive electronic environments.
Q: What is the recommended shaft tolerance for installation?
A: We recommend a shaft tolerance of h9 and a housing tolerance of H7 for optimal fit and performance.
Q: Does this require external lubrication during use?
A: No, these bearings are oil-impregnated during manufacturing and are self-lubricating under normal operating conditions.
Q: How should I install this bushing into the housing?
A: It should be installed using a press fit method. Ensure the housing is clean and deburred before pressing the bushing in.