Attributes

Brand	-
Category	Industrial Small Parts / Bearings & Bushings
Origin	-
Material	High-Carbon Steel
Inner Diameter Options	25/30/40/50/60 mm
Outer Diameter Tolerance	H7/g6
Length Type	Extended Length
Surface Finish	Zinc Plated
Hardness	HRC 45-50
Load Capacity	High Radial Load
Operating Temperature	-20°C to 120°C
Application	Industrial Machinery, Automotive
Package Contents	1 x Steel Sleeve Bushing

5 reviews

Anonymous

Apr 16, 2026

Rating: 4/5

Solid construction

Very sturdy sleeve. The zinc plating helps prevent rust. Just make sure to measure your shaft correctly before ordering.

Anonymous

Mar 29, 2026

Rating: 5/5

Great value for money

Compared to local suppliers, this is much more affordable without compromising on quality. Will buy again.

Anonymous

Mar 25, 2026

Rating: 5/5

Wear-resistant as advertised

Been using this in a high-friction environment for months. No signs of wear yet. Highly recommend for heavy loads.

Anonymous

Feb 08, 2026

Rating: 4/5

Good quality, slight delay

The bushing itself is heavy-duty and well-made. Shipping took a bit longer than expected, but the product is worth it.

Anonymous

Feb 01, 2026

Rating: 5/5

Perfect fit for my lathe

Exactly what I needed for my machinery repair. The steel is solid and the sizing was accurate within tolerance.

5 FAQ

Q: Does this bushing require additional lubrication during installation?

A: Yes, we recommend applying standard machine oil or grease to the inner and outer surfaces before installation to ensure smooth operation.

Q: What is the corrosion resistance level of the zinc plating?

A: The zinc plating provides basic corrosion resistance suitable for indoor industrial environments. For outdoor use, additional coating may be required.

Q: What tool is recommended for installing this sleeve?

A: A hydraulic press or an arbor press is recommended for installation to ensure even pressure and prevent damage to the bushing.

Q: Can I order a custom length if standard sizes do not fit?

A: Currently, we stock standard extended lengths. For custom dimensions, please contact our sales team for a bulk order inquiry.

Q: Is this compatible with an aluminum housing?

A: Yes, this steel bushing can be pressed into an aluminum housing. Please ensure the housing tolerance matches the bushing outer diameter.

Explore your interests

WWI Anrui Motor Deep Groove Ball Bearings 6200, 6201, 6202, 6203, 6204-ZZ 2RZ High-Speed Quiet

$40.00

Domestic Bearing Steel Linear Guide Rail Block MGN12H 9H 7H 15H MGW7C 9C 12C 15CS

$4.50

Automotive Inspection Fixture Standard Parts Round Liner Shaft Bushing Straight Sleeve Threaded Sleeve Guide Bushing Inspection Pin Sleeve In Stock

$3.00

304 Stainless Steel Cross Recessed Indented External Hex Bolts GB29.2 External Hex Screws M3 M4 M5 M6

$1.00

304 Stainless Steel Hex Socket Screw Cup Head Bolt Cylinder Head Extended M2 M2.5 M3 M4 M5 M6 M8 M10mm

$1.43

Real Photo EZO Imported Stainless Steel Bearing 608HZZ 8*22*7mm S608ZZ High Speed

$13.50

SWC Light/Heavy Duty Cross Shaft Universal Coupling, Universal Shaft, Drive Shaft, and Universal Joint

$220.00

T-Shaped Rubber Hexagonal Spider Coupling Elastic Block Polyurethane Buffer Pad Water Pump Shock Absorber Toughened Hex Pad

$5.00

Stainless Steel Bushings (Inner Dia: 2/2.5mm, Outer Dia: 4/5/6mm), Steel Guide Sleeves, Wear-Resistant Liners, Miniature Spacers

$2.00

Thickened Flange Nut with Washer, High-Strength Alloy Steel Press Plate Screw Nut M8-M36

$3.40

[M2-M20] Stainless Steel Spring Washer

$0.76

$Rubber Gear Coupling 14J\13J\12J\11J\10J\9J\8J\7J\6J\5J\4J\3J$

Rubber Gear Coupling 14J\13J\12J\11J\10J\9J\8J\7J\6J\5J\4J\3J

$15.00

Sunroom Column Base Steel Casting Embedded Parts 80 100 120 150 Special Square Tube Base Connector

$6.03

Nickel-Plated/Black PB Pan Head Flat Point Self-Tapping Screw, Cross Recessed Small Screw M1-M4

$1.00

Box-Type Shaft Slider Linear Bearing SCS8 10 12 13 16 20 25 30 35 40 50 60UU

$6.40

Maintenance-Free Plastic Linear Bearing Slide Bushing LM1016230450UU (igus Alternative)

$6.36

Non-Standard BFH Aluminum Alloy Bearing Housing with Retaining Ring, Round Flange, Single Bearing Fixed Mount BARA BFF23

$16.90

Hardened Bearing Steel Bushing, Wear-Resistant Liner, High-Precision Guide Sleeve, Collar, and Spacer Set

$3.69

Imported Bearing Model Assortment: 6000RS, 6001 High-Speed, 6002 Motor, 6003, 6004, 6005, 6006

$2.50

25mm Round Stainless Steel Pipe Connector, Clothes Drying Rack Accessory, Display Stand Fastener, Shelf Fixing Two-Way Joint

$1.20

Miniature Ball Bearings with Shoulder Flange Catalog - Inner Diameters 2 3 4 5 6 7 8 9 10

$13.00

L-Type Jaw Coupling, Spider Coupling, High Torque, Black Oxide Finish, Free Shipping from Manufacturer

$7.00

Japan EKI LM3 4 5 6 8 10 12 16 20 25 30 35 40 50UU Imported Linear Bearing

$10.50

Japanese Precision Imported NSK Linear Bearing LM 3 4 5 6 8 10 12 13 16 20 25 30 UU

$6.50

304 Stainless Steel Countersunk Hex Socket Screw and Nut Set with Flat and Spring Washers

$1.29

Grade 12.9 External Hex Screws and Nuts Complete Set High-Strength Bolts with Flat and Spring Washers M6-M24

$9.03

304 Stainless Steel Nuts, Caps, Flat Washers, and Spring Washers - Sizes M3, M4, M5, M6, M8, M10, M12, M16, M18, M20, M22, M24, M30

$1.00

C&U Bearings for Automotive Alternators - SA608, 6201, 6202, 6302, 6303, 6304/2RSM/C3

$3.50

Plastic Hammer Head Nut M8 M10 Furniture Connector Embedded Fastener Hardware Accessories

$5.11

Swing Cylinder Front Bucket Bushing 95*110*80 with TOM Oil Bronze Bushing for Excavator and Large Loader Liners

$90.00

304 Stainless Steel Rivet Nuts, Aluminum Flat Head Rivnuts, Countersunk Rivet Nuts Assortment M3 M4 M5 M6 M8 M10

$0.91

Stainless Steel Angle Bracket 90-Degree L-Shaped Fixator Corner Iron Right-Angle Triangle Support Shelf Bracket Hardware Connector Plate T

$2.66

Aluminum Alloy Socket Head Cap Screw, Cup Head Fastener M4-M10mm

$7.00

Galvanized High-Strength Imperial Hex Flange Nuts UNC Grade 8, Anti-Slip Locking; UNF Fine Thread Nuts

$2.20

M3-M20 PVC External Hex Head Screws, Gray Insulated Bolts, Acid and Alkali Resistant Plastic Fasteners

$2.64

NSK High-Speed Imported Micro Bearings 605 606 607 608 609 ZZ Z1 Z2 Z3 Z4

$3.00

Aluminum Alloy Shaft Bushing, Washer, Tube Sleeve, Spacer Column, Casing, Flat Gasket, Retaining Ring, Aluminum Joint Sleeve M2 M3 M4 M5 M8-m12

$9.00

Phone Gimbal Shim, Screw Plate, Heavy-Duty Clamp Shim, Internal 1/4" Screw Pad, Nut Washer, Anti-Slip Fixation Pad

$2.80

304 Stainless Steel Extended Cylindrical Sleeve Shaft Bushing Non-Threaded Spacer Hollow Liner M2 M3 M4 M5

$1.66

Guwanji Zinc-Plated Iron Cross Countersunk Screw, Nut, Flat Head Bolt, and Spring Washer Assortment M2-M12

$1.82