Attributes

Brand	-
Category	Industrial Small Parts / Bearings & Bushings
Origin	-
Material Composition	CuSn8Zn3Pb5 Bronze with Graphite Plugs
Bearing Type	Flanged Sleeve Bearing (Shoulder-Type)
Lubrication	Self-Lubricating (Solid Graphite)
Inner Diameter Options	25mm, 30mm (Model Dependent)
Outer Diameter Options	29mm to 40mm (Model Dependent)
Length Options	25mm to 50mm (Model Dependent)
Max Static Load Capacity	120 N/mm²
Max Dynamic Load Capacity	40 N/mm²
Operating Temperature Range	-40°C to +250°C
Surface Finish	Precision Machined and Deburred

5 reviews

Anonymous

Apr 01, 2026

Rating: 5/5

No grease needed

Saved us a lot of maintenance time. The graphite plugs provide enough lubrication for our low-speed high-load application. Highly recommend.

Anonymous

Mar 20, 2026

Rating: 5/5

Perfect for high temperature applications

Used these on an oven conveyor system. The self-lubricating feature holds up well under heat where standard grease would burn off. Fit was precise.

Anonymous

Feb 24, 2026

Rating: 5/5

Bulk order satisfied

Ordered multiple models for our facility. Dimensions were consistent across the batch. Packaging prevented any damage during shipping.

Anonymous

Feb 18, 2026

Rating: 4/5

Solid construction

Heavy duty feel. The flange provides good stability against axial loads. Would prefer more detailed tolerance sheets included in the box.

Anonymous

Jan 29, 2026

Rating: 4/5

Good quality bronze

Solid construction. The fit was slightly tight on the shaft initially but seated properly after break-in. Good value for industrial use.

5 FAQ

Q: Is the flange removable if I don't need it?

A: No, the flange is cast as part of the bearing body and cannot be removed. Please select a straight sleeve model if a flange is not required.

Q: Do I need to add oil or grease during installation?

A: No, these bearings feature embedded graphite plugs that provide self-lubrication. Adding oil is not necessary and may attract dust.

Q: What is the typical lead time for shipping?

A: Most models are in stock and ship within 2 business days. Custom sizes may require additional manufacturing time.

Q: What is the recommended shaft tolerance for these bearings?

A: We recommend a shaft tolerance of h9 for optimal performance and fit with the JFB series bronze bushings.

Q: Can this bearing handle exposure to water?

A: Yes, the bronze material offers good corrosion resistance. However, prolonged exposure to saltwater is not recommended without additional protection.

Explore your interests

WWI Anrui Motor Deep Groove Ball Bearings 6200, 6201, 6202, 6203, 6204-ZZ 2RZ High-Speed Quiet

$40.00

Domestic Bearing Steel Linear Guide Rail Block MGN12H 9H 7H 15H MGW7C 9C 12C 15CS

$4.50

Automotive Inspection Fixture Standard Parts Round Liner Shaft Bushing Straight Sleeve Threaded Sleeve Guide Bushing Inspection Pin Sleeve In Stock

$3.00

304 Stainless Steel Cross Recessed Indented External Hex Bolts GB29.2 External Hex Screws M3 M4 M5 M6

$1.00

304 Stainless Steel Hex Socket Screw Cup Head Bolt Cylinder Head Extended M2 M2.5 M3 M4 M5 M6 M8 M10mm

$1.43

Real Photo EZO Imported Stainless Steel Bearing 608HZZ 8*22*7mm S608ZZ High Speed

$13.50

SWC Light/Heavy Duty Cross Shaft Universal Coupling, Universal Shaft, Drive Shaft, and Universal Joint

$220.00

T-Shaped Rubber Hexagonal Spider Coupling Elastic Block Polyurethane Buffer Pad Water Pump Shock Absorber Toughened Hex Pad

$5.00

Stainless Steel Bushings (Inner Dia: 2/2.5mm, Outer Dia: 4/5/6mm), Steel Guide Sleeves, Wear-Resistant Liners, Miniature Spacers

$2.00

Thickened Flange Nut with Washer, High-Strength Alloy Steel Press Plate Screw Nut M8-M36

$3.40

[M2-M20] Stainless Steel Spring Washer

$0.76

$Rubber Gear Coupling 14J\13J\12J\11J\10J\9J\8J\7J\6J\5J\4J\3J$

Rubber Gear Coupling 14J\13J\12J\11J\10J\9J\8J\7J\6J\5J\4J\3J

$15.00

Sunroom Column Base Steel Casting Embedded Parts 80 100 120 150 Special Square Tube Base Connector

$6.03

Nickel-Plated/Black PB Pan Head Flat Point Self-Tapping Screw, Cross Recessed Small Screw M1-M4

$1.00

Box-Type Shaft Slider Linear Bearing SCS8 10 12 13 16 20 25 30 35 40 50 60UU

$6.40

Maintenance-Free Plastic Linear Bearing Slide Bushing LM1016230450UU (igus Alternative)

$6.36

Non-Standard BFH Aluminum Alloy Bearing Housing with Retaining Ring, Round Flange, Single Bearing Fixed Mount BARA BFF23

$16.90

Hardened Bearing Steel Bushing, Wear-Resistant Liner, High-Precision Guide Sleeve, Collar, and Spacer Set

$3.69

Imported Bearing Model Assortment: 6000RS, 6001 High-Speed, 6002 Motor, 6003, 6004, 6005, 6006

$2.50

25mm Round Stainless Steel Pipe Connector, Clothes Drying Rack Accessory, Display Stand Fastener, Shelf Fixing Two-Way Joint

$1.20

Miniature Ball Bearings with Shoulder Flange Catalog - Inner Diameters 2 3 4 5 6 7 8 9 10

$13.00

L-Type Jaw Coupling, Spider Coupling, High Torque, Black Oxide Finish, Free Shipping from Manufacturer

$7.00

Japan EKI LM3 4 5 6 8 10 12 16 20 25 30 35 40 50UU Imported Linear Bearing

$10.50

Japanese Precision Imported NSK Linear Bearing LM 3 4 5 6 8 10 12 13 16 20 25 30 UU

$6.50

304 Stainless Steel Countersunk Hex Socket Screw and Nut Set with Flat and Spring Washers

$1.29

Grade 12.9 External Hex Screws and Nuts Complete Set High-Strength Bolts with Flat and Spring Washers M6-M24

$9.03

304 Stainless Steel Nuts, Caps, Flat Washers, and Spring Washers - Sizes M3, M4, M5, M6, M8, M10, M12, M16, M18, M20, M22, M24, M30

$1.00

C&U Bearings for Automotive Alternators - SA608, 6201, 6202, 6302, 6303, 6304/2RSM/C3

$3.50

Plastic Hammer Head Nut M8 M10 Furniture Connector Embedded Fastener Hardware Accessories

$5.11

Swing Cylinder Front Bucket Bushing 95*110*80 with TOM Oil Bronze Bushing for Excavator and Large Loader Liners

$90.00

304 Stainless Steel Rivet Nuts, Aluminum Flat Head Rivnuts, Countersunk Rivet Nuts Assortment M3 M4 M5 M6 M8 M10

$0.91

Stainless Steel Angle Bracket 90-Degree L-Shaped Fixator Corner Iron Right-Angle Triangle Support Shelf Bracket Hardware Connector Plate T

$2.66

Aluminum Alloy Socket Head Cap Screw, Cup Head Fastener M4-M10mm

$7.00

Galvanized High-Strength Imperial Hex Flange Nuts UNC Grade 8, Anti-Slip Locking; UNF Fine Thread Nuts

$2.20

M3-M20 PVC External Hex Head Screws, Gray Insulated Bolts, Acid and Alkali Resistant Plastic Fasteners

$2.64

NSK High-Speed Imported Micro Bearings 605 606 607 608 609 ZZ Z1 Z2 Z3 Z4

$3.00

Aluminum Alloy Shaft Bushing, Washer, Tube Sleeve, Spacer Column, Casing, Flat Gasket, Retaining Ring, Aluminum Joint Sleeve M2 M3 M4 M5 M8-m12

$9.00

Phone Gimbal Shim, Screw Plate, Heavy-Duty Clamp Shim, Internal 1/4" Screw Pad, Nut Washer, Anti-Slip Fixation Pad

$2.80

304 Stainless Steel Extended Cylindrical Sleeve Shaft Bushing Non-Threaded Spacer Hollow Liner M2 M3 M4 M5

$1.66

Guwanji Zinc-Plated Iron Cross Countersunk Screw, Nut, Flat Head Bolt, and Spring Washer Assortment M2-M12

$1.82