Anonymous
Mar 31, 2026
Rating: 5/5
Solid build quality
The machining on the aluminum block is precise. Temperature stability is excellent even during long prints. Very satisfied with this purchase.
Description
Reviews
| Brand | - |
| Category | 3C Digital Accessories / USB Multi-Function Power Bank |
| Origin | - |
| Compatibility | Creality CR-6 SE |
| Nozzle Diameter | 0.4mm (Standard) |
| Filament Size | 1.75mm |
| Material | Aluminum Alloy & Brass |
| Heater Power | 24V 40W |
| Thermistor Type | NTC 100K |
| Assembly Status | Pre-assembled Hotend |
| Cooling Fan | Included (4010 Blower) |
| Version | Upgraded V2.0 |
| Package Weight | 150g |
Anonymous
Mar 31, 2026
Rating: 5/5
Solid build quality
The machining on the aluminum block is precise. Temperature stability is excellent even during long prints. Very satisfied with this purchase.
Anonymous
Mar 24, 2026
Rating: 5/5
Fast shipping and great performance
Arrived two days early. Installed it right away and ran a calibration print which came out flawless. Great value for the price.
Anonymous
Mar 23, 2026
Rating: 3/5
Works but instructions unclear
The part itself functions well, but the included installation guide was very vague. Had to watch a YouTube video to get it installed correctly.
Anonymous
Mar 16, 2026
Rating: 4/5
Good upgrade, minor fan noise
The extruder works great and heats up quickly. The only downside is the cooling fan is slightly louder than the original, but it cools efficiently.
Anonymous
Mar 05, 2026
Rating: 5/5
Saved my printer
My old hotend was damaged beyond repair. This replacement brought my printer back to life. Highly recommend keeping a spare of these on hand.
Anonymous
Mar 02, 2026
Rating: 5/5
Perfect fit for my CR-6 SE
This hotend assembly was exactly what I needed. Installation took less than 10 minutes and the print quality improved immediately. No more clogging issues!
Q: What is the maximum temperature this hotend can handle?
A: The upgraded heater cartridge supports temperatures up to 260°C safely, suitable for PLA, PETG, and ABS filaments.
Q: Is this compatible with the original CR-6?
A: This specific model is designed for the CR-6 SE. While it may fit the original CR-6 with modifications, we cannot guarantee compatibility without adjustments.
Q: Do I need to level the bed again after installing?
A: Yes, whenever you replace the hotend assembly, it is highly recommended to re-level the build plate to ensure proper first-layer adhesion.
Q: Can I use 3.0mm filament with this?
A: No, this extruder is strictly designed for 1.75mm filament. Using 3.0mm filament will cause jams and potential damage to the unit.
Q: Does this come with the silicone sock?
A: No, the silicone sock is not included in this package. It must be purchased separately or reused from your old assembly if intact.