Anonymous
Mar 29, 2026
Rating: 4/5
Good value, clear instructions
Solid build quality for the price. The LEDs are bright and make debugging easy. I deducted one star because the header pins were not included, but soldering them on was simple.
Description
Reviews
| Brand | - |
| Category | Robotics / STEM Teaching Tools / Sensors |
| Origin | - |
| Operating Voltage | 5V DC / 12V DC |
| Output Signal | Digital Switch (High/Low) |
| Detection Angle | Adjustable via Potentiometer |
| Indicator | Green Power LED, Red Detection LED |
| Mounting Hole Diameter | 3.0 mm |
| PCB Dimensions | 32mm x 14mm x 5mm |
| Interface Type | 3-Pin Header (VCC, GND, OUT) |
| Sensor Type | Mechanical Tilt Switch |
| Response Time | < 1ms |
| Application Compatibility | Arduino, Raspberry Pi, STM32 |
Anonymous
Mar 29, 2026
Rating: 4/5
Good value, clear instructions
Solid build quality for the price. The LEDs are bright and make debugging easy. I deducted one star because the header pins were not included, but soldering them on was simple.
Anonymous
Mar 26, 2026
Rating: 5/5
Perfect for my robotics project
This tilt module works exactly as described. The sensitivity adjustment is very smooth, allowing me to set the exact angle needed for my robot's balance system. Highly recommended for beginners.
Anonymous
Mar 24, 2026
Rating: 5/5
Reliable and responsive
I bought five of these for a classroom project. All of them worked out of the box with our Arduino kits. The switching action is crisp and reliable.
Anonymous
Mar 23, 2026
Rating: 4/5
Does the job well
Simple plug-and-play sensor. It detected the tilt immediately upon connection. The board is compact and fits easily into small enclosures.
Anonymous
Mar 10, 2026
Rating: 5/5
Great sensitivity control
The potentiometer allows for fine-tuning the trigger angle, which was crucial for my specific application. It handles both 5V and 12V inputs without any issues.
Anonymous
Mar 05, 2026
Rating: 5/5
Excellent for learning
As someone new to electronics, this module was easy to understand and integrate. The documentation provided by the seller was helpful too.
Q: Is the mounting hardware included in the package?
A: The package includes the PCB module only. Screws and standoffs are not included, but the standard 3mm mounting holes fit most common M3 hardware.
Q: What is the maximum current this sensor can switch?
A: This module is designed as a signal sensor for microcontrollers, not for high-power loads. The output current should not exceed 20mA. Please use a relay or transistor if you need to control higher power devices.
Q: Can this module be used directly with a 3.3V microcontroller?
A: While the module supports 5V and 12V input, the output signal is typically pulled up to the input voltage. For 3.3V systems, we recommend using a voltage divider or a logic level converter on the output pin to ensure safe operation.
Q: How do I adjust the tilt angle sensitivity?
A: There is a blue potentiometer on the back of the board. Use a small screwdriver to rotate it clockwise or counter-clockwise while tilting the module until the red LED triggers at your desired angle.
Q: Does this work outdoors in rainy conditions?
A: No, this module is not waterproof or weather-sealed. It is intended for indoor use or must be housed in a protective enclosure if used outdoors.