Anonymous
Mar 31, 2026
Rating: 5/5
Standard for hobbyists
This is the go-to optical dust sensor for electronics projects. The 6-pin connector makes wiring easy, and it draws very little current.
Description
Reviews
| Brand | - |
| Category | Robotics / STEM Teaching Tools / Sensors |
| Origin | - |
| Model Number | GP2Y1014AUVF |
| Detection Principle | Optical Scattering |
| Detectable Particle Size | Approx. 0.5 to 10 micrometers |
| Operating Voltage | 5V DC (Typical) |
| Output Type | Analog Voltage |
| Response Time | Less than 10ms |
| Operating Temperature | -10°C to +60°C |
| Storage Temperature | -20°C to +70°C |
| Connector Type | 6-Pin JST Connector |
| Dimensions | 46 x 35 x 18 mm |
Anonymous
Mar 31, 2026
Rating: 5/5
Standard for hobbyists
This is the go-to optical dust sensor for electronics projects. The 6-pin connector makes wiring easy, and it draws very little current.
Anonymous
Mar 25, 2026
Rating: 5/5
Perfect for DIY Air Quality Monitors
This sensor works exactly as described. I integrated it with an Arduino and the analog readings are consistent. Great for detecting dust levels in my workshop.
Anonymous
Mar 22, 2026
Rating: 4/5
Good value, requires calibration
The module is solid and well-built. Keep in mind you need to write your own code to interpret the voltage into PM2.5 values, but the datasheet helps.
Anonymous
Mar 21, 2026
Rating: 5/5
Reliable detection
I used this to trigger my air purifier when cooking smoke is detected. It reacts very quickly to changes in air quality. Highly recommended.
Anonymous
Mar 15, 2026
Rating: 4/5
Works well for larger particles
Great for monitoring general dust and smoke. Just remember it is an optical sensor, so it estimates mass based on scattering, not a laser counter.
Anonymous
Mar 04, 2026
Rating: 5/5
Easy to interface
Even as a beginner, I got this working with a Raspberry Pi ADC within an hour. The output voltage scales linearly with dust density as expected.
Q: Is there a library available for Arduino?
A: While we do not provide official software, there are several open-source community libraries available on GitHub specifically for the GP2Y1014AUVF.
Q: How often does the sensor need cleaning?
A: For optimal performance, we suggest inspecting the lens every 6 months. If dust accumulation is visible, gently clean it with compressed air or a soft swab.
Q: What is the minimum voltage required to operate this module?
A: The typical operating voltage is 5V DC. While it may function slightly lower, we recommend a stable 5V supply for accurate readings.
Q: Can this detect cigarette smoke effectively?
A: Yes, the optical scattering principle used by this sensor is effective at detecting fine particulates found in cigarette smoke and cooking fumes.
Q: Does this sensor output digital data directly?
A: No, the GP2Y1014AUVF outputs an analog voltage proportional to the dust density. You will need an Analog-to-Digital Converter (ADC) to read it with a microcontroller.