Description
Reviews
| Brand | - |
| Category | Material Handling & Logistics Equipment / Other Lifting & Handling Equipment |
| Origin | - |
| Material | Titanium Alloy and Red Copper |
| Thread Type | M7 |
| Compatibility | E3D V6 Hotend System |
| Design Type | All-Metal Heatbreak |
| Max Temperature | Up to 300°C |
| Inner Diameter | 2.0 mm |
| Outer Diameter | 6.0 mm |
| Total Length | 22 mm |
| Surface Finish | Polished Titanium |
| Package Contents | 1x Throat Tube, 1x Installation Guide |
Anonymous
Mar 28, 2026
Rating: 5/5
Essential upgrade
If you are serious about 3D printing with engineering materials, this is a must-have. The thermal conductivity of the red copper section is impressive.
Anonymous
Mar 27, 2026
Rating: 5/5
Perfect for high-temp filaments
This titanium alloy throat tube works flawlessly with my E3D V6 setup. I switched to printing ABS and Nylon without any clogging issues. The heat resistance is excellent.
Anonymous
Mar 23, 2026
Rating: 4/5
Great quality but tight fit
The build quality is top-notch, very sturdy. It was a bit difficult to screw in initially due to the tight M7 threads, but once installed, it performs perfectly.
Anonymous
Mar 23, 2026
Rating: 5/5
Solved my heat creep problems
I was experiencing constant heat creep with my brass nozzle setup. Switching to this all-metal red copper and titanium combination completely solved the issue. Highly recommended.
Anonymous
Mar 08, 2026
Rating: 4/5
Good value for money
Works as described. My prints are smoother now at higher temperatures. Just make sure your hotend block is properly aligned before tightening.
Anonymous
Mar 05, 2026
Rating: 5/5
Durable and reliable
Been using this for three months now with PETG and Polycarbonate. No signs of wear or degradation. The titanium alloy holds up well against repeated heating cycles.
Q: Does the package include a nozzle or just the throat tube?
A: The package includes only the throat tube and an installation guide. Nozzles are sold separately.
Q: Is this compatible with the standard E3D V6 hotend?
A: Yes, this throat tube is specifically designed for the standard E3D V6 hotend system with M7 threading.
Q: Do I need to apply thermal paste during installation?
A: It is highly recommended to apply a small amount of thermal paste to ensure optimal heat transfer between the components.
Q: Can I use this with PLA filament?
A: Absolutely. While it is optimized for high-temperature materials, it works perfectly fine with PLA as well.
Q: What is the maximum temperature this can withstand?
A: The titanium alloy and red copper construction allows for safe operation up to approximately 300°C.
Thickened Aluminum Alloy Stainless Steel Floor Wire Raceway - Surface-Mounted Cable Cover Protector, Anti-Crush, Self-Adhesive Invisible Design
$2.13
Kids Foam Stamp Brushes - Mushroom-Tipped Painting Set for Kindergarten Art and Graffiti Projects
$2.38
Heisidike HZL-32 Portable Stone Removal Hook for Car Tire Tread Cleaning
$9.28
Bixilage Cheese Processing Equipment – Curd Fermentation Machine for Stretchy Hand-Pulled Cheese Production Line
$67,900.00
Essential Oil Soap Stamping Machine DIY Stamp Maker Semi-Auto Pneumatic Stampler Small Handmade Soap Equipment
$2,173.00
Inverted Barrel Water Stand - Simple U-Shaped Thickened Holder for Purified Water Buckets with Dispenser Outlet
$21.00
Qingling Pickup 2.8T Diesel Isuzu 4JB1-T1 Engine Turbocharger Pump Assembly
$1,502.00
Juli JL-499 Heat Resistant up to 150°C Instant Adhesive High Performance Low Whitening Transparent High-Temperature Fast-Drying Glue
$90.30
Stainless Steel Buffet Warmer with Hydraulic Lift - Commercial Electric Heating Chafing Dish
$882.00
Zhaobei New Felt Calligraphy Mat Anti-Pilling Painting Felt Chinese Painting Cloth Brush Character Calligraphy Felt Pad
$29.70
Fruit Picking Bucket with Shoulder Strap, Manual Fertilizer Spreader, Durable Rubber Harvest Container for Seeds and Chemicals
$26.57
Baohong Artist Grade Watercolor Pad - 100% Cotton Pulp, 300gsm, Glued on Four Sides, Available in 16K, 8K, 4K with Cold Press or Hot Press Texture
$42.00
Commercial Brush Peeling Machine for Sweet Potatoes, Ginger, Taro, Mustard Greens, and Kohlrabi
$15.90
No-Drill Invisible Cable Organizer – Self-Adhesive Wire Fixer, Data Cable Clip, and Net Cable Management Solution
$6.90
Stone Landscape Sculpture Engraved Pebble Gate Stone Cornerstone Roadside Marker
$838.05
Kitchen Sink Organizer Rack, Dish Drying Rack, Multi-Function Countertop Storage Shelf for Washing and Placing Bowls
$55.70
New Hanging Kitchen Sink Strainer Basket, Multi-Function Colander for Washing Vegetables and Filtering Leftovers
$7.74
Sting Bite Relief Pen Electric Bug Bite Relief for Indoor
$60.14
Thickened 160g Gouache Paper 8K/4K for Beginners and Art Exam Students - Professional Art Painting Paper for Watercolor, Gouache, and Acrylic Creation and Practice
$5.78
Pad Printing Ink Cup Sealing Ring Rubber Gasket Elastic Rubber Ink Cartridge O-Ring Silicone Ink Leak-Proof Eco-Friendly Ink Cup Seal
$9.70
Stainless Steel Walnut Kernel Peeling Machine - Pecan Physical Peeling Equipment, DDA Washing Unit, Nut Kernel Peeler
$36,315.00
Daxiang Machinery Top-Flow Pillow Packaging Machine for Vegetables, Bread, Mooncakes, Cakes, Food, and Fruit Sealing
$35,475.00
50 Pcs Market Commodity Price Tag ers Advertising Tags Paper
$45.37
Fountain in the Rain by Kaoru Sudo, Mr. Chui Saxophone, Three-Piece Precise Transcription Service
$37.00
No-Clean Airbrush Set Electric Spray Gun Mini Bottom-Feed Airbrush for Furniture Leather Repair Paint and Art
$225.00
Rubber Cable Raceway Speed Bump for Ground Crossing
$15.05
Replacement Blade Holder and Rotating Wheel for Butter Tea Maker - Includes Waterproof Gasket; Compatible with Milk Separators and Switch Assemblies
$56.50
Commercial Hanging Roast Duck Warmer Crispy Pork Belly Insulation Box Stainless Steel Countertop Roasted Meat Heater Cooked Food Display Cabinet
$317.00
2MM 3MM 4MM Natural Color-Gradient Amethyst Soccer-Cut Faceted Loose Beads - Semi-Finished Amethyst Cuts
$17.00
Educational Toys for Babies 0-3 Years - Newborn Rattle and Musical Stick for Boys and Girls (0-12 Months)
$12.80
