Anonymous
Mar 30, 2026
Rating: 5/5
Clean sound restoration
Replaced the aging capacitors in my portable music stand's power section. The device runs cooler and sounds cleaner now.
Description
Reviews
| Brand | - |
| Category | 3C Digital Accessories / MP3/MP4 Stands |
| Origin | - |
| Capacitance | 330 µF |
| Voltage Rating | 25 V |
| Tolerance | ±20% |
| Package Type | Radial Lead |
| Diameter | 10 mm |
| Height | 9 mm |
| Temperature Range | -40°C to +105°C |
| Ripple Current | 480 mA @ 100kHz |
| Lifetime | 2000 hours @ 105°C |
| Series | WXA |
Anonymous
Mar 30, 2026
Rating: 5/5
Clean sound restoration
Replaced the aging capacitors in my portable music stand's power section. The device runs cooler and sounds cleaner now.
Anonymous
Mar 28, 2026
Rating: 5/5
Reliable Japanese quality
Rubycon is always a safe bet. These hold their capacitance well under load and have low ESR. Great for power supply filtering in my custom MP3 player mods.
Anonymous
Mar 25, 2026
Rating: 5/5
Exactly as described
Arrived quickly and matched the datasheet specifications perfectly. No issues with leakage or fitting on the PCB.
Anonymous
Mar 17, 2026
Rating: 4/5
Good value, standard specs
Solid capacitors for general electronics projects. Leads are sturdy and easy to solder. One star off because the packaging was a bit loose, but the parts were fine.
Anonymous
Mar 07, 2026
Rating: 5/5
Perfect replacement for old audio gear
Used these to recap an old amplifier board. The dimensions fit perfectly in the tight spots, and the audio quality improved immediately with less hum.
Anonymous
Mar 04, 2026
Rating: 4/5
Standard radial cap
Works well for replacing blown caps in consumer electronics. The 25V rating is sufficient for most low-voltage logic boards.
Q: Are these capacitors polarized?
A: Yes, these are aluminum electrolytic capacitors and are polarized. Please observe the negative stripe marking on the casing when installing.
Q: Is this suitable for high-frequency switching power supplies?
A: While these have decent ripple current ratings, for very high-frequency switching applications, you might want to consider a dedicated low-ESR or polymer series for optimal efficiency.
Q: What is the lead spacing (pitch) for this component?
A: For the 10mm diameter version of this series, the standard lead pitch is typically 5.0mm.
Q: Can I use a higher voltage rating instead?
A: Yes, you can generally substitute with a capacitor of the same capacitance but a higher voltage rating (e.g., 35V or 50V), provided it fits physically on your board.
Q: Do you sell these in bulk packs?
A: Yes, we offer bulk pricing for quantities over 100 units. Please contact our sales team or check the quantity selector on the product page.