Anonymous
Apr 03, 2026
Rating: 5/5
Durable and reliable
Been running this for three months continuously. No clogging issues and the steel hasn't corroded at all.
Description
Reviews
| Brand | - |
| Category | 3D Printing Accessories / Hot End and Nozzle |
| Origin | - |
| Material | 304 Stainless Steel |
| Spray Pattern | Flat Fan |
| Atomization Type | Two-Fluid (Air & Water) |
| Air Connection | 1/8 inch NPT |
| Water Connection | 1/8 inch NPT |
| Operating Pressure | 20 - 80 PSI |
| Liquid Flow Rate | 5 - 15 Liters per Hour |
| Droplet Size | 50 - 100 Microns |
| Max Temperature | 80 Degrees Celsius |
| Weight | 120 Grams |
Anonymous
Apr 03, 2026
Rating: 5/5
Durable and reliable
Been running this for three months continuously. No clogging issues and the steel hasn't corroded at all.
Anonymous
Mar 30, 2026
Rating: 5/5
Excellent atomization
I use this for humidification in a storage room. It handles the pressure well and the flat fan pattern covers a good area.
Anonymous
Mar 18, 2026
Rating: 4/5
Good quality but needs steady air
The nozzle itself is great quality. Just make sure your compressor can maintain steady pressure or the mist varies.
Anonymous
Feb 18, 2026
Rating: 5/5
Perfect for my greenhouse setup
This nozzle creates a very fine mist without dripping. The stainless steel build feels durable and the adjustment knob works smoothly.
Anonymous
Feb 08, 2026
Rating: 5/5
Easy to install
Threads were perfect fit for my 1/8 NPT lines. Adjustment is intuitive for controlling flow rate.
Q: Do I need a water filter?
A: Yes, a 50-micron filter is recommended to prevent clogging.
Q: How do I clean the nozzle?
A: Flush with clean water and use a soft brush if debris is visible.
Q: Is this compatible with hot water?
A: Yes, it can handle water temperatures up to 80 degrees Celsius.
Q: What is the minimum air pressure required?
A: We recommend a minimum of 20 PSI for proper atomization.
Q: What are the thread specifications?
A: Both air and liquid connections are 1/8 inch NPT threads.