A
Anonymous
Apr 09, 2026
Rating: 5/5
Easy to install
Threads matched our existing piping perfectly. Installation was straightforward without leaks.
Description
LNN Stainless Steel Fine Atomizing Nozzle with Internal/External Threads for Low-Pressure Coal Mines, Workshops, Humidification, Dust Removal, and Micro-Mist Disinfection
Reviews
Attributes
| Brand | - |
| Category | 3D Printing Accessories / Hot End and Nozzle |
| Origin | - |
| Material | 304 Stainless Steel |
| Thread Type | Internal/External Mixed |
| Operating Pressure | 0.5 - 3.0 Bar |
| Flow Rate | 0.1 - 0.5 L/min |
| Spray Angle | 60° - 120° |
| Droplet Size | 10 - 50 Microns |
| Connection Size | 1/4 Inch |
| Temperature Range | -20°C to 120°C |
| Surface Finish | Polished |
| Primary Application | Dust Suppression & Humidification |
5 reviews
A
Anonymous
Apr 09, 2026
Rating: 5/5
Durable steel quality
The stainless steel construction feels robust. No signs of corrosion after three months of continuous use.
A
Anonymous
Mar 20, 2026
Rating: 5/5
Effective solution
Helps maintain air quality in our storage facility. Low pressure requirement is a plus for our setup.
A
Anonymous
Feb 26, 2026
Rating: 4/5
Good atomization
Works well for humidification. Took a little time to adjust the pressure correctly but performs well now.
A
Anonymous
Feb 13, 2026
Rating: 5/5
Great for workshop dust
Installed these in our carpentry shop. The mist is fine enough to settle dust without soaking the wood. Very satisfied.
5 FAQ
Q: What pressure pump is recommended?
A: We recommend a low-pressure pump between 0.5 to 3.0 Bar for optimal performance.
Q: Is this suitable for chemical misting?
A: It is compatible with neutral industrial cleaning solutions. Avoid highly acidic compounds.
Q: What is the thread size exactly?
A: The connection size is standard 1/4 inch, supporting both internal and external threading.
Q: Does it clog easily?
A: With filtered water, clogging is minimal. We recommend regular maintenance checks.
Q: Can this handle hot water?
A: Yes, it can withstand temperatures up to 120°C safely.
![Bambu Lab Right Hotend Heating Assembly 3D Printer Accessory [Compatible with H2D]](https://www.gosteppe.com/cache/medium/product/2203/legacy-main-d56482b3801c18329d097eb5.png)
![[Sold Out & Discontinued - Display Only] Radish Defense ABO20.0 Spring Tour Series Blind Box Figure](https://www.gosteppe.com/cache/small/product/269201/legacy-main-5af4651a8d30dc42d9412600.png)
