Anonymous
Apr 11, 2026
Rating: 5/5
Excellent Water Removal
Works perfectly on our conveyor line. It removed all the water from the parts after washing without damaging them. Very efficient.
Description
Reviews
| Brand | - |
| Category | 3D Printing Accessories / Hot End and Nozzle |
| Origin | - |
| Material | Aluminum Alloy |
| Length | 12 Inches (300mm) |
| Air Consumption | 10 SCFM @ 80 PSIG |
| Max Pressure | 150 PSIG (10.3 Bar) |
| Inlet Connection | 1/4 Inch NPT |
| Weight | 1.5 lbs (0.68 kg) |
| Surface Finish | Anodized |
| Noise Level | 69 dBA |
| Operating Temperature | -40°F to 180°F |
| Warranty | 1 Year Limited |
Anonymous
Apr 11, 2026
Rating: 5/5
Excellent Water Removal
Works perfectly on our conveyor line. It removed all the water from the parts after washing without damaging them. Very efficient.
Anonymous
Mar 28, 2026
Rating: 4/5
Good Value
Does the job well for dust blowing. I wish it was available in a longer size for our specific setup, but overall good value.
Anonymous
Mar 07, 2026
Rating: 5/5
Reduced Air Costs
Noticed a drop in air consumption compared to our old nozzles. The efficiency gain will pay for the unit quickly.
Anonymous
Jan 29, 2026
Rating: 5/5
Quiet Operation
Much quieter than the open pipe we were using before. The noise reduction is significant and makes the shop environment better.
Anonymous
Jan 21, 2026
Rating: 5/5
Easy to Install
Threaded nicely into our existing manifold. Installation took less than 10 minutes. No leaks detected at max pressure.
Q: Is a filter recommended for the air supply?
A: Yes, we recommend using a 5-micron filter to prevent debris from clogging the air knife slots.
Q: What is the standard lead time for shipping?
A: Orders placed before 2 PM EST usually ship within 24 hours via standard ground shipping.
Q: Does this come with mounting brackets?
A: Mounting brackets are sold separately. Please check our accessories section for compatible bracket kits.
Q: What is the minimum pressure required for operation?
A: We recommend at least 40 PSIG for effective blowing, though it operates efficiently up to 150 PSIG.
Q: Can this be used in food processing applications?
A: The material is aluminum alloy. Please consult your local safety regulations regarding direct contact with food products.