Anonymous
Mar 28, 2026
Rating: 5/5
Perfect replacement for my old Swan
These screws fit my 24-hole Swan harmonica perfectly. The threads were clean and the length was exactly right to secure the cover plates without poking through.
Description
Reviews
| Brand | - |
| Category | Musical Instruments/Guitars/Pianos/Accessories / Harmonicas |
| Origin | - |
| Material | Stainless Steel |
| Thread Size | M2.0 x 8mm |
| Head Type | Flat Head Phillips |
| Finish | Polished Silver |
| Compatibility | 24/28-Hole Tremolo Harmonicas |
| Brand Fit | Guoguang, Swan, Dongfang, Universal |
| Package Quantity | 12 Screws per Pack |
| Weight | 5 grams |
| Corrosion Resistance | High |
| Origin | Made in China |
Anonymous
Mar 28, 2026
Rating: 5/5
Perfect replacement for my old Swan
These screws fit my 24-hole Swan harmonica perfectly. The threads were clean and the length was exactly right to secure the cover plates without poking through.
Anonymous
Mar 28, 2026
Rating: 3/5
Works but head strips easily
They fit well, but be careful not to overtighten. The Phillips head stripped slightly when I applied too much torque with my screwdriver.
Anonymous
Mar 23, 2026
Rating: 4/5
Good quality, slightly tight
The stainless steel feels very durable. They were a bit tight going into the plastic comb at first, but after careful tightening, they hold securely.
Anonymous
Mar 20, 2026
Rating: 5/5
Essential for maintenance
Every harmonica player should have a pack of these. They are standard size for most Asian-made tremolo models and very affordable.
Anonymous
Mar 13, 2026
Rating: 5/5
Great value pack
You get plenty of screws in the pack. I used them to upgrade the hardware on three different harmonicas. No rust issues so far.
Anonymous
Mar 10, 2026
Rating: 5/5
Saved my vintage Guoguang
I lost two screws from my vintage Guoguang tremolo. These universal screws matched the thread pitch perfectly. Highly recommended for repairs.
Q: Will these fit a 28-hole Easttop harmonica?
A: Yes, these screws are designed with a universal thread pitch that fits most 24 and 28-hole tremolo models, including Easttop, provided the hole diameter is standard M2.0.
Q: Are these screws long enough for thick cover plates?
A: At 8mm in length, they are suitable for standard cover plates. If your harmonica has unusually thick custom plates, you might need a longer variant.
Q: Can I use these on a diatonic 10-hole harmonica?
A: Generally no. Diatonic harmonicas often use different thread sizes and lengths. These are specifically optimized for 24/28-hole tremolo models.
Q: Do these come with a screwdriver?
A: No, this package contains only the screws. You will need a small Phillips #00 or #000 screwdriver for installation.
Q: Is the material magnetic?
A: Stainless steel can have varying magnetic properties depending on the specific alloy, but these are primarily chosen for corrosion resistance rather than magnetic traits.