Anonymous
Mar 18, 2026
Rating: 5/5
Excellent Value
Fast shipping and works out of the box with Arduino IDE. The amplifier drives a small speaker well.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Development Boards & Control Boards |
| Origin | - |
| Microcontroller Unit | ESP32-P4 |
| Flash Memory | 16MB QSPI |
| PSRAM | 8MB Octal |
| Microphone | INMP441 Silicon MEMS |
| Audio Codec | ES8311 |
| Audio Amplifier | NS4150 |
| Amplifier Output | 3W @ 5V |
| Wireless | Wi-Fi 4 + Bluetooth 5 |
| USB Interface | Type-C OTG |
| Input Voltage | 5V DC |
Anonymous
Mar 18, 2026
Rating: 5/5
Excellent Value
Fast shipping and works out of the box with Arduino IDE. The amplifier drives a small speaker well.
Anonymous
Mar 04, 2026
Rating: 3/5
Good but Hot
Runs a bit warm under load. Make sure you have ventilation if running WiFi and audio simultaneously.
Anonymous
Mar 01, 2026
Rating: 5/5
Perfect ESP32-P4 Option
Love the included audio components. Saves me from soldering separate modules.
Anonymous
Feb 19, 2026
Rating: 5/5
Great for Audio IoT
Used this for a voice command prototype. The mic quality is surprisingly good for the price.
Anonymous
Feb 09, 2026
Rating: 4/5
Solid Board, Docs need work
Hardware is excellent but getting the audio pipeline running in ESP-IDF took some digging.
Q: Does this support MicroPython?
A: Yes, ESP32-P4 is compatible with MicroPython builds.
Q: Is the USB port data capable?
A: Yes, it supports USB OTG for device or host mode.
Q: Can I power this with a LiPo battery?
A: No, there is no charging circuit. Use a 5V regulated supply.
Q: What speaker impedance works best?
A: 4 Ohm to 8 Ohm speakers are recommended for the NS4150.
Q: Are the GPIO pins 5V tolerant?
A: No, all GPIOs are 3.3V logic level.