Anonymous
Mar 28, 2026
Rating: 4/5
Good hardware, documentation could be better
The module itself works great and the range is impressive. However, the included manual was a bit vague on AT commands. Found info online though.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Development Boards & Control Boards |
| Origin | - |
| Model Number | WS63 StarFlash |
| Interface Type | UART TTL Serial |
| Operating Voltage | 3.3V - 5V DC |
| Wireless Frequency | 2.4 GHz ISM Band |
| Transmission Distance | Up to 100 meters (open space) |
| Default Baud Rate | 9600 bps |
| Transmission Mode | Transparent Transmission |
| PCB Dimensions | 25mm x 15mm x 3mm |
| Weight | 4.5 grams |
| Compatible Platforms | Arduino, STM32, Raspberry Pi |
Anonymous
Mar 28, 2026
Rating: 4/5
Good hardware, documentation could be better
The module itself works great and the range is impressive. However, the included manual was a bit vague on AT commands. Found info online though.
Anonymous
Mar 22, 2026
Rating: 5/5
Fast shipping and plug and play
Arrived quickly and worked out of the box. Paired easily with my STM32 board. No issues with voltage levels using a 3.3V logic setup.
Anonymous
Mar 06, 2026
Rating: 5/5
Great range for the price
Tested this in an open field and got close to the advertised 100 meters. Very happy with the performance for home automation projects.
Anonymous
Feb 27, 2026
Rating: 3/5
Needs logic level shifter for 5V
Be careful if you are using 5V Arduino boards directly. I recommend a logic level shifter to protect the module. Works fine once configured correctly.
Anonymous
Feb 25, 2026
Rating: 5/5
Works perfectly for IoT sensors
I used this module to send temperature data from my backyard to the main house. The connection is stable and setup was straightforward with my Arduino Uno.
Q: What is the actual range indoors with walls?
A: Indoor range depends on wall materials. Typically, you can expect 20 to 40 meters through standard drywall and wood frames.
Q: Does this support Bluetooth Low Energy (BLE)?
A: No, this module uses classic Bluetooth serial protocol for transparent transmission. It is not compatible with BLE specific profiles.
Q: Is this module compatible with 5V Arduino Uno logic?
A: The module operates at 3.3V logic. While it can be powered by 5V, we recommend using a logic level shifter for the TX/RX pins to ensure long-term reliability.
Q: Is there a way to reset the module to factory settings?
A: Yes, holding the configuration button while powering on the module usually resets it to default factory settings. Check the manual for specific timing.
Q: Can I change the baud rate using AT commands?
A: Yes, the module supports AT commands to configure baud rate, pairing name, and other settings. Please refer to the digital datasheet for the command list.