Anonymous
Apr 12, 2026
Rating: 5/5
Excellent for HMI Projects
This board works great with ESP-IDF. The high-speed USB and display interfaces make it perfect for building custom control panels. Setup was straightforward.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Development Boards & Control Boards |
| Origin | - |
| Microcontroller | ESP32-P4 |
| CPU Frequency | Up to 400 MHz |
| Flash Memory | 16MB QSPI |
| PSRAM | 8MB Octal PSRAM |
| Display Interface | 8080 Parallel / RGB / SPI |
| Camera Interface | 2x CSI (DVP) |
| USB Interface | USB OTG Full Speed |
| Power Supply | 5V via Type-C |
| Dimensions | 95 x 55 x 15 mm |
| Operating Temperature | -40°C to 85°C |
Anonymous
Apr 12, 2026
Rating: 5/5
Excellent for HMI Projects
This board works great with ESP-IDF. The high-speed USB and display interfaces make it perfect for building custom control panels. Setup was straightforward.
Anonymous
Mar 20, 2026
Rating: 5/5
Perfect for Displays
Drove the 10-inch screen easily. The RGB interface is well implemented. Great addition to my workshop for prototyping smart home interfaces.
Anonymous
Mar 18, 2026
Rating: 3/5
Missing Standoffs
Board works as expected but the kit did not include mounting standoffs. Had to source them separately to fit my enclosure.
Anonymous
Mar 09, 2026
Rating: 5/5
Fast Performance
The P4 chip is much faster for multimedia tasks. I successfully drove a high-resolution screen without lag. Highly recommend for IoT displays.
Anonymous
Jan 22, 2026
Rating: 4/5
Good Value
Solid board for the price. Performance is noticeable compared to older ESP32 models. Documentation could be slightly more detailed for beginners.
Q: Is the camera module included in this kit?
A: The camera is optional. Please check your specific order selection for CSI camera inclusion.
Q: Does this board support the Arduino IDE?
A: Yes, it is compatible with the Arduino IDE using the ESP32 core package.
Q: What is the GPIO voltage level?
A: The GPIO pins operate at 3.3V logic level. Please use level shifters for 5V peripherals.
Q: Can I run MicroPython on this device?
A: Yes, MicroPython is supported on the ESP32-P4 chip.
Q: What is the maximum resolution for the camera interface?
A: It supports up to 1080P at 30fps depending on the camera module used.