Anonymous
Apr 02, 2026
Rating: 4/5
Good Value
Works as expected. Documentation could be better but standard STM32 resources apply.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Development Boards & Control Boards |
| Origin | - |
| Core Architecture | ARM Cortex-M4F |
| Max Frequency | 168 MHz |
| Flash Memory | 1 MB |
| SRAM Capacity | 192 KB |
| Operating Voltage | 3.3V |
| USB Interface | USB OTG FS/HS |
| GPIO Pins | 112 Fast I/O |
| Debug Interface | SWD / JTAG |
| Board Dimensions | 55 x 55 mm |
| Package Weight | 25 g |
Anonymous
Apr 02, 2026
Rating: 4/5
Good Value
Works as expected. Documentation could be better but standard STM32 resources apply.
Anonymous
Mar 30, 2026
Rating: 5/5
Perfect for Prototyping
Great board for getting started with STM32. Pinout is clear and works well with Keil.
Anonymous
Feb 15, 2026
Rating: 5/5
Fast Shipping
Board arrived quickly. Tested the USB OTG and it works perfectly with my custom firmware.
Anonymous
Feb 02, 2026
Rating: 5/5
Reliable Hardware
No issues with voltage regulation. All GPIOs tested functional. Recommended for professionals.
Anonymous
Feb 02, 2026
Rating: 5/5
Solid Core Board
Using this for an industrial sensor project. Stable performance and good build quality.
Q: What debugger do you recommend?
A: We recommend the ST-Link V2 or V3 for debugging this core board.
Q: Can it run at 3.3V logic?
A: Yes, the GPIO operates at 3.3V logic levels. Do not connect 5V directly to GPIO pins.
Q: Is the crystal oscillator included?
A: Yes, the board comes with an 8MHz HSE crystal oscillator onboard.
Q: Is it compatible with STM32CubeIDE?
A: Yes, this board is fully supported by STM32CubeIDE and standard HAL libraries.
Q: Does this come with a USB cable?
A: No, the board is sold separately. You will need a micro USB cable for power.