Anonymous
Mar 04, 2026
Rating: 4/5
Good value board
Works as expected. Only giving 4 stars because the pinout diagram on the box was slightly faded, but the online docs are fine.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Development Boards & Control Boards |
| Origin | - |
| Microcontroller | STM32F401CCU6 |
| Flash Memory | 256 KB |
| SRAM | 64 KB |
| CPU Frequency | 84 MHz |
| Operating Voltage | 3.3V |
| Input Interface | Micro USB Type-B |
| GPIO Ports | 36 Pins |
| ADC Resolution | 12-bit |
| Supported IDE | Arduino, Keil, MicroPython |
| Board Dimensions | 52 x 23 mm |
Anonymous
Mar 04, 2026
Rating: 4/5
Good value board
Works as expected. Only giving 4 stars because the pinout diagram on the box was slightly faded, but the online docs are fine.
Anonymous
Feb 16, 2026
Rating: 5/5
Great STM32 starter
Perfect introduction to ARM Cortex-M4 programming. The USB bootloader makes flashing very easy without extra hardware.
Anonymous
Feb 11, 2026
Rating: 3/5
Decent but needs knowledge
Not plug-and-play for absolute beginners unless you know STM32 architecture. Good hardware though.
Anonymous
Feb 08, 2026
Rating: 5/5
Excellent for MicroPython
This board works flawlessly with MicroPython. Setup was straightforward and the performance is solid for beginner projects.
Anonymous
Jan 21, 2026
Rating: 5/5
Fast shipping
Arrived quickly and was well packaged. The board looks high quality with good soldering on the headers.
Q: What is the maximum input voltage?
A: Please supply 5V via the USB port. The GPIO pins operate at 3.3V logic levels.
Q: Is this compatible with the Arduino IDE?
A: Yes, this board can be programmed using the Arduino IDE with the appropriate STM32 core installed.
Q: Can I use this for motor control?
A: Yes, it has PWM capable pins suitable for controlling small motors and servos.
Q: Does it come with headers soldered?
A: No, the headers are not soldered by default to allow for flexible mounting options.
Q: Is an ST-Link debugger included?
A: No, this board uses the built-in USB bootloader. An external debugger is optional for advanced debugging.