Anonymous
Mar 28, 2026
Rating: 5/5
Perfect for small robots
Works exactly as described with my Arduino Uno. The screw terminals make wiring secure.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Development Boards & Control Boards |
| Origin | - |
| Input Voltage | 5V to 12V DC |
| Max Output Current | 1.5A Continuous |
| Logic Voltage | 3.3V / 5V TTL |
| Control Interface | PWM Compatible |
| Protection Features | Over-Current & Thermal |
| Board Dimensions | 25mm x 15mm x 5mm |
| Weight | 3 grams |
| Operating Temperature | -20°C to 85°C |
| Connector Type | Screw Terminal & Pin Header |
| Package Contents | 1x Module, 1x Pin Header Strip |
Anonymous
Mar 28, 2026
Rating: 5/5
Perfect for small robots
Works exactly as described with my Arduino Uno. The screw terminals make wiring secure.
Anonymous
Feb 15, 2026
Rating: 4/5
Good value
Does the job but gets a bit warm under load. Recommend adding a small fan for continuous use.
Anonymous
Feb 12, 2026
Rating: 3/5
Documentation lacking
Hardware is fine but the wiki link on the box was broken. Had to search online for pinout.
Anonymous
Feb 12, 2026
Rating: 5/5
Easy integration
Plug and play with ESP32. No extra libraries needed beyond standard PWM functions.
Anonymous
Feb 04, 2026
Rating: 5/5
Fast delivery
Great little driver for DC motors. Compact size fits well in my project enclosure.
Q: Can this driver control stepper motors?
A: No, this is designed for brushed DC motors only, not stepper motors.
Q: Is a heat sink included with the module?
A: No, a heat sink is not included, but the chip has built-in thermal protection.
Q: Does it support motor braking functions?
A: Yes, braking can be achieved through specific PWM control signal configurations.
Q: What is the maximum input voltage supported?
A: This module supports DC input voltage ranging from 5V to 12V.
Q: Can I use this with 3.3V logic boards?
A: Yes, the control logic accepts both 3.3V and 5V TTL signals.