Anonymous
Mar 30, 2026
Rating: 5/5
Precise control for laser
Works flawlessly with my DIY laser cooling setup. Temperature stability is impressive.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Development Boards & Control Boards |
| Origin | - |
| Input Voltage | 12V DC / 24V DC Selectable |
| Control Mode | Digital PID Algorithm |
| Temperature Range | -55°C to 120°C |
| Control Output | PWM H-Bridge Drive |
| Sensor Type | NTC 10K or PT100 |
| Display Type | 0.56 Inch LED Digital |
| Communication | UART TTL Interface |
| Max Current | 5A Continuous Load |
| Board Dimensions | 60mm x 40mm x 15mm |
| Protection | Over-current & Over-temperature |
Anonymous
Mar 30, 2026
Rating: 5/5
Precise control for laser
Works flawlessly with my DIY laser cooling setup. Temperature stability is impressive.
Anonymous
Mar 25, 2026
Rating: 5/5
Perfect for mini fridge
Keeps temp stable within 0.5 degrees. Great for converting a mini fridge into a cooler.
Anonymous
Feb 17, 2026
Rating: 4/5
Good board, learning curve
PID settings took time to configure correctly but performance is solid once tuned.
Anonymous
Feb 04, 2026
Rating: 3/5
Documentation needs improvement
Had to guess wiring for the TEC module initially. Schematic could be clearer.
Anonymous
Jan 19, 2026
Rating: 5/5
Stable and reliable
Using it for sensor calibration equipment. No drift observed over 48 hours.
Q: What is the maximum power output?
A: Max output depends on input voltage. At 24V, it can handle up to 120W safely.
Q: Can I use a PT100 sensor?
A: Yes, PT100 is supported. Please check the manual for the correct jumper setting.
Q: Is PID auto-tuning available?
A: Yes, auto-tuning is available. Hold the set button for 5 seconds to initiate.
Q: Does this support 12V TEC modules?
A: Yes, this board supports both 12V and 24V TEC modules via jumper selection.
Q: Does it come with a heatsink?
A: No, the board does not include a heatsink. Please attach one for high load applications.