Anonymous
Apr 09, 2026
Rating: 5/5
Compatible with Arduino IDE
I was able to upload sketches using the Arduino IDE with the appropriate board manager package. Very versatile.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Development Boards & Control Boards |
| Origin | - |
| Microcontroller | STM32F103C8T6 |
| CPU Core | ARM Cortex-M3 |
| Max Frequency | 72 MHz |
| Flash Memory | 64 KB |
| SRAM | 20 KB |
| Operating Voltage | 3.3V |
| Digital I/O Pins | 37 |
| Analog Input Channels | 10 (12-bit) |
| Interfaces | USART, I2C, SPI, USB, CAN |
| Debug Interface | SWD / JTAG |
Anonymous
Apr 09, 2026
Rating: 5/5
Compatible with Arduino IDE
I was able to upload sketches using the Arduino IDE with the appropriate board manager package. Very versatile.
Anonymous
Mar 18, 2026
Rating: 5/5
Reliable performance
Running a sensor data logger for weeks without any crashes. The 72MHz speed is sufficient for most tasks.
Anonymous
Feb 05, 2026
Rating: 5/5
Great value for money
I bought five of these for my students. All of them were working out of the box. Highly recommended for education.
Anonymous
Jan 23, 2026
Rating: 5/5
Perfect for embedded projects
This board works flawlessly with STM32CubeIDE. The pinout is standard and it fits perfectly on a breadboard.
Anonymous
Jan 19, 2026
Rating: 4/5
Good board, needs headers
The board itself is excellent. Just note that it does not come with pin headers soldered, so you need to do that yourself.
Q: Can I power this with 5V?
A: You can supply 5V to the 5V pin, but the logic level is 3.3V. Do not input 5V into GPIO pins.
Q: Is the USB port data capable?
A: Yes, the Micro USB port supports data transfer for programming and serial communication.
Q: Does this come with a bootloader?
A: Yes, this board comes with a pre-installed bootloader that supports USB DFU programming.
Q: Which debugger do you recommend?
A: We recommend using an ST-Link V2 debugger via the SWD interface for the best debugging experience.
Q: What is the current limit?
A: The onboard regulator can supply approximately 150mA to 200mA for external components.