Anonymous
Apr 11, 2026
Rating: 4/5
Good for learning
Documentation could be better but hardware is solid. Great for university projects.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Development Boards & Control Boards |
| Origin | - |
| CPU Type | Dual-Core Tensilica LX6 Microprocessor |
| Clock Frequency | 240 MHz |
| Flash Memory | 4MB SPI Flash |
| SRAM Size | 520 KB |
| Wi-Fi Standard | 802.11 b/g/n (2.4 GHz) |
| Bluetooth Capability | Bluetooth v4.2 BR/EDR and BLE |
| USB Interface Chip | CP2102 or CH9102 (Varies by Batch) |
| Input Voltage Range | 5V via Micro USB or 3.3V-5V via VIN |
| Digital I/O Pins | 30+ Programmable GPIOs |
| Package Dimensions | 55mm x 28mm x 13mm |
Anonymous
Apr 11, 2026
Rating: 4/5
Good for learning
Documentation could be better but hardware is solid. Great for university projects.
Anonymous
Mar 20, 2026
Rating: 5/5
Excellent stability
Been running for weeks without disconnect. The Wi-Fi range is impressive for such a small board.
Anonymous
Feb 01, 2026
Rating: 4/5
Solid performance
Dual core is very helpful for multitasking. One pin was bent but fixed easily.
Anonymous
Jan 31, 2026
Rating: 5/5
Perfect for Home Assistant
Integrates easily with ESPHome. Highly recommend for smart home sensors.
Anonymous
Jan 23, 2026
Rating: 5/5
Fast shipping
Arrived quickly and works as described. USB chip detected immediately on Windows 11.
Q: Does this support OTA updates?
A: Yes, the ESP32 supports Over-The-Air firmware updates via Wi-Fi.
Q: Is there a reset button?
A: Yes, there is an EN button for reset and a BOOT button for flashing mode.
Q: What IDE do you recommend?
A: Arduino IDE, PlatformIO, and ESP-IDF are all supported options.
Q: Is the USB cable included?
A: No, the package includes the board only. A standard Micro USB cable is required.
Q: Can I use 5V sensors directly?
A: No, the GPIOs are 3.3V logic. Use a level shifter for 5V sensors.