Anonymous
Mar 07, 2026
Rating: 5/5
Excellent Development Tool
This board made tuning FOC parameters much easier for my project. The STM32 integration is seamless.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Development Boards & Control Boards |
| Origin | - |
| Microcontroller | STM32F103C8T6 |
| Control Algorithm | Field Oriented Control (FOC) |
| Input Voltage | 12V - 24V DC |
| Max Continuous Current | 5 Amperes |
| Communication Interface | UART, SWD, GPIO |
| Motor Type | 3-Phase Brushless DC |
| PCB Dimensions | 50mm x 40mm |
| Weight | 15 Grams |
| Source Code | C Language Included |
| Compatible Motors | Shinano Kenshi BLDC |
Anonymous
Mar 07, 2026
Rating: 5/5
Excellent Development Tool
This board made tuning FOC parameters much easier for my project. The STM32 integration is seamless.
Anonymous
Mar 02, 2026
Rating: 5/5
Great Documentation
The provided source code is well commented. Helped me understand the control loop quickly.
Anonymous
Feb 17, 2026
Rating: 3/5
Steep Learning Curve
Great hardware but requires strong embedded C knowledge. Not recommended for absolute beginners.
Anonymous
Jan 30, 2026
Rating: 5/5
Perfect for Shinano Motors
Matched perfectly with my Shinano BLDC setup. Plug and play with the provided firmware.
Anonymous
Jan 22, 2026
Rating: 4/5
Good but runs warm
Performance is solid though it heats up under load. Make sure to use a heatsink for continuous operation.
Q: Is the schematic available?
A: Yes, included in the downloadable package on the product page.
Q: What IDE is recommended?
A: We recommend STM32CubeIDE or Keil MDK for development.
Q: Does this support sensorless control?
A: Yes, sensorless FOC is supported via the included source code.
Q: Does it work with Arduino?
A: It uses STM32, so Arduino IDE is not directly supported without specific core configurations.
Q: Can I use 36V input?
A: No, please stay within 12V to 24V range to avoid damaging the board.