Anonymous
Mar 30, 2026
Rating: 5/5
Perfect for embedded control
Using this for motor control logic. Very stable performance.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Development Boards & Control Boards |
| Origin | - |
| FPGA Chip Model | AG10KF256 |
| Logic Elements | 256,000 LEs |
| Embedded Memory | 12 Mbits |
| User IO Pins | 64 Pins |
| Power Supply | 5V DC via USB-C |
| Programming Port | JTAG / USB Blaster Compatible |
| Clock Source | 50MHz Active Oscillator |
| Configuration Storage | 128Mbit QSPI Flash |
| Supported HDL | Verilog, VHDL |
| Board Dimensions | 100mm x 80mm |
Anonymous
Mar 30, 2026
Rating: 5/5
Perfect for embedded control
Using this for motor control logic. Very stable performance.
Anonymous
Mar 23, 2026
Rating: 5/5
Fast shipping
Arrived well packaged. Board boots up immediately.
Anonymous
Mar 22, 2026
Rating: 5/5
Solid build quality
PCB quality is excellent. All headers are labeled clearly.
Anonymous
Mar 03, 2026
Rating: 4/5
Good value but learning curve
Hardware is great, but software setup took some time compared to Intel tools.
Anonymous
Feb 23, 2026
Rating: 5/5
Great alternative to Altera
Works perfectly for my university project. The pinout is well documented.
Q: Is it compatible with Intel Quartus?
A: No, this requires the AGM FPGA Designer software suite.
Q: Does this support VHDL?
A: Yes, the AGM toolchain supports both Verilog and VHDL.
Q: Are schematics available?
A: Yes, you can download the schematic from the product resource page.
Q: Is the programming cable included?
A: Yes, a USB Type-C cable is included in the box.
Q: What is the IO voltage level?
A: The bank voltage is configurable, typically 3.3V for general IO.