Anonymous
Mar 31, 2026
Rating: 4/5
Good value component
Solid build quality for the price. You definitely need an amplifier module to read the signal properly. Good addition to my parts kit.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Computer Hardware, Monitors & Peripherals |
| Origin | - |
| Model Number | YZC131 |
| Sensor Type | Strain Gauge Load Cell |
| Rated Capacity | 50kg |
| Output Sensitivity | 1.0 ± 0.1 mV/V |
| Excitation Voltage | 5-15V DC |
| Material | Aluminum Alloy |
| Wire Configuration | 4-Wire (Red, Black, White, Green) |
| Compatible Amplifier | HX711 Module |
| Operating Temperature | -20°C to +60°C |
| Primary Application | DIY Electronic Scales |
Anonymous
Mar 31, 2026
Rating: 4/5
Good value component
Solid build quality for the price. You definitely need an amplifier module to read the signal properly. Good addition to my parts kit.
Anonymous
Mar 28, 2026
Rating: 5/5
Great for jewelry scale build
Built a small jewelry scale with this. Once calibrated, it gives consistent readings down to the gram. Highly recommend for hobbyists.
Anonymous
Mar 20, 2026
Rating: 4/5
Accurate but requires care
The sensor is very sensitive and accurate. Just make sure you mount it correctly on a stable surface, otherwise readings fluctuate.
Anonymous
Mar 05, 2026
Rating: 5/5
Fast shipping and works well
Arrived quickly and was well packaged. The wiring colors matched the diagram provided. No issues so far after a week of use.
Anonymous
Feb 16, 2026
Rating: 5/5
Perfect for Arduino Projects
I used this load cell to build a custom shipping scale. It paired perfectly with the HX711 amplifier and was easy to calibrate using standard libraries.
Q: What library do you recommend for calibration?
A: The 'HX711 Arduino Library' by Bogdan Necula is widely used and includes examples for calibration and tare functions.
Q: Is this sensor waterproof for outdoor use?
A: No, this module is not waterproof. It should be used in dry, indoor environments to prevent damage to the electronics.
Q: Do I need an amplifier to use this with Arduino?
A: Yes, the output signal is very small. You will need an amplifier module like the HX711 to interface it with a microcontroller.
Q: What are the wire color functions for this module?
A: Typically, Red and Black are for Excitation (+E and -E), while White and Green are for Signal (+S and -S). Please check the specific datasheet for your batch.
Q: Can this measure weights below 1 gram?
A: While sensitive, this model is rated for 50kg. For sub-gram precision, a lower capacity load cell is recommended for better resolution.