Anonymous
Apr 10, 2026
Rating: 4/5
Good but needs tuning
Works well but I had to adjust the sensitivity pad for my thick plastic case. Otherwise solid.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Computer Hardware, Monitors & Peripherals |
| Origin | - |
| Chip Model | TTP223B / TTP224 / TTP226 (Selectable) |
| Operating Voltage | 2.0V to 5.5V DC |
| Output Mode | Momentary or Latching (Configurable) |
| Response Time | Approx. 60ms at VDD=3V |
| Interface Type | Digital Output (GPIO) |
| PCB Dimensions | 16mm x 16mm (Single Channel) |
| Mounting Hole Size | 3mm Diameter |
| Operating Temperature | -10°C to 85°C |
| Compatibility | Arduino, Raspberry Pi, ESP8266, ESP32 |
| Package Includes | 1x Touch Sensor Module (Headers not included) |
Anonymous
Apr 10, 2026
Rating: 4/5
Good but needs tuning
Works well but I had to adjust the sensitivity pad for my thick plastic case. Otherwise solid.
Anonymous
Feb 21, 2026
Rating: 5/5
Compact and Efficient
Low power consumption and small footprint. Ideal for wearable tech or battery-powered devices.
Anonymous
Feb 20, 2026
Rating: 5/5
Reliable Touch Switch
Used this for a lamp control project. The latching mode is very stable and does not drift over time.
Anonymous
Feb 19, 2026
Rating: 5/5
Plug and Play
No complex libraries needed, just digital read. Highly recommend for beginners starting with sensors.
Anonymous
Jan 21, 2026
Rating: 5/5
Great for DIY Projects
Works perfectly with my Arduino Uno. Very sensitive and easy to wire up for basic touch controls.
Q: Can I connect multiple modules to one board?
A: Yes, each module requires one GPIO pin. You can chain as many as your controller supports.
Q: How do I change the mode to latching?
A: There is a solder jumper on the back of the module to switch between momentary and latching modes.
Q: Does this come with header pins for breadboard?
A: Headers are not included by default, so you may need to solder pins for breadboard use.
Q: What is the maximum input voltage allowed?
A: The module supports up to 5.5V, but 3.3V or 5V is recommended for most microcontrollers.
Q: Can this sensor work through a glass panel?
A: Yes, it can detect touch through non-conductive materials like glass or plastic up to a certain thickness.