Anonymous
Apr 07, 2026
Rating: 4/5
Does the job
Sensitivity screw is small but functional. Good value for the price compared to others.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Computer Hardware, Monitors & Peripherals |
| Origin | - |
| Operating Voltage | 12V DC |
| Sensor Type | Mechanical Tilt Switch |
| Relay Contact Rating | 10A 250VAC / 10A 30VDC |
| Trigger Angle Adjustment | 15° to 45° |
| Standby Current | Less than 20mA |
| Operating Temperature | -20°C to 70°C |
| Housing Material | ABS Plastic |
| PCB Dimensions | 50mm x 30mm x 15mm |
| Mounting Hole Diameter | 4mm |
| Status Indicator | Red LED |
Anonymous
Apr 07, 2026
Rating: 4/5
Does the job
Sensitivity screw is small but functional. Good value for the price compared to others.
Anonymous
Mar 31, 2026
Rating: 5/5
Easy installation
Clear labeling on the terminals. Took me 10 minutes to wire up into my alarm system.
Anonymous
Mar 22, 2026
Rating: 4/5
Good module
Works well but the LED is quite bright at night. Had to put some tape over it for my installation.
Anonymous
Mar 14, 2026
Rating: 5/5
Reliable detection
Using it for a generator tip-over safety cut-off. Works instantly when the angle changes.
Anonymous
Mar 07, 2026
Rating: 5/5
Great for trailer security
Installed it on my boat trailer. Alerts me if someone tries to tow it away. Very sensitive and easy to adjust.
Q: What size wires fit the terminals?
A: The screw terminals accommodate wires from 18AWG to 14AWG comfortably.
Q: Can I use this outdoors?
A: The module itself is not waterproof. Please install it inside a waterproof enclosure.
Q: Is this suitable for 24V trucks?
A: No, this module is designed specifically for 12V DC systems.
Q: How do I reset the sensitivity?
A: Use a small flathead screwdriver on the blue potentiometer to adjust the trigger angle.
Q: Does the relay stay on after tilt?
A: No, the relay activates only while the tilt angle exceeds the set threshold.