Anonymous
Mar 17, 2026
Rating: 3/5
Confusing wiring
Worked after figuring out the pins. Documentation could be clearer.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Computer Hardware, Monitors & Peripherals |
| Origin | - |
| Operating Voltage | 5V - 12V DC |
| Output Type | Digital Switch (HIGH/LOW) |
| Detection Range | 360 Degrees |
| Pin Interface | 3-Pin Header (VCC, GND, OUT) |
| Current Draw | 15mA (Max) |
| PCB Material | FR-4 Fiberglass |
| Operating Temperature | -20°C to 80°C |
| Module Dimensions | 32mm x 14mm x 5mm |
| Net Weight | 3.5 grams |
| Controller Support | Arduino, PLC, Raspberry Pi |
Anonymous
Mar 17, 2026
Rating: 3/5
Confusing wiring
Worked after figuring out the pins. Documentation could be clearer.
Anonymous
Feb 27, 2026
Rating: 5/5
Perfect angle detection
Exactly what I needed for my project. Fast response time.
Anonymous
Feb 19, 2026
Rating: 5/5
Solid construction
No issues after weeks of testing. The PCB quality is excellent.
Anonymous
Jan 27, 2026
Rating: 5/5
Great for automation
Used in a conveyor belt stopper. Very reliable and triggers consistently.
Anonymous
Jan 21, 2026
Rating: 4/5
Good but sensitive
Works well but needs careful mounting to avoid false positives.
Q: Is there a potentiometer for sensitivity?
A: Yes, there is an onboard trimmer to adjust trigger angle.
Q: What is the pinout order?
A: From left to right facing the component: VCC, GND, OUT.
Q: Is it waterproof?
A: No, the PCB is not coated. Use an enclosure for protection.
Q: Can I connect directly to 12V PLC?
A: Yes, but ensure common ground and verify logic level compatibility.
Q: Does it output analog voltage?
A: No, this is a digital switch output indicating tilt presence.