Anonymous
Mar 31, 2026
Rating: 5/5
Reliable switch mechanism
Using this in a safety cut-off system. It triggers consistently when tilted past 45 degrees.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Computer Hardware, Monitors & Peripherals |
| Origin | - |
| Operating Voltage | 5V DC / 12V DC (Selectable) |
| Output Signal | Digital Switch (High/Low) |
| Detection Angle | Adjustable 0 to 90 Degrees |
| Current Consumption | Approx. 15mA |
| PCB Dimensions | 32mm x 14mm x 5mm |
| Mounting Hole Size | 3mm Diameter |
| Operating Temperature | -20°C to +70°C |
| Interface Type | 3-Pin PH2.54 Header |
| Power Indicator | Red LED Present |
| Signal Indicator | Green LED Present |
Anonymous
Mar 31, 2026
Rating: 5/5
Reliable switch mechanism
Using this in a safety cut-off system. It triggers consistently when tilted past 45 degrees.
Anonymous
Mar 24, 2026
Rating: 4/5
Good value for money
Does what it says. The soldering points are clear but I wish the manual was more detailed.
Anonymous
Mar 18, 2026
Rating: 3/5
Requires calibration
Had to spend some time tuning the potentiometer to get the desired trigger point. Works okay now.
Anonymous
Jan 28, 2026
Rating: 5/5
Fast shipping and quality item
Arrived well protected. Tested on 12V system without issues. Highly recommend for hobbyists.
Anonymous
Jan 20, 2026
Rating: 5/5
Great for automation projects
This sensor works flawlessly with my Arduino Uno. The sensitivity is adjustable which is a nice touch.
Q: Is the output normally open or normally closed?
A: The output state can be adjusted via the onboard potentiometer to suit your logic needs.
Q: Can I use this outdoors?
A: The PCB is not weatherproof. We recommend enclosing it in a protective case for outdoor use.
Q: Does it come with header pins soldered?
A: No, the header pins are included in the package but need to be soldered by the user.
Q: What is the response time of the sensor?
A: The switching response is nearly instantaneous, suitable for real-time detection applications.
Q: Can this module work with a Raspberry Pi?
A: Yes, it is compatible with Raspberry Pi GPIO pins when powered at 5V.