Anonymous
Mar 28, 2026
Rating: 5/5
Reliable Counting
No false triggers detected during my testing phase. Very stable output.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Computer Hardware, Monitors & Peripherals |
| Origin | - |
| Detection Mode | Through-Beam |
| Operating Voltage | DC 5V - 24V |
| Output Type | NPN/PNP Open Collector |
| Slot Width | 5mm |
| Response Time | < 0.5ms |
| Current Consumption | 15mA (Typical) |
| Load Current | Max 100mA |
| Indicator | Power & Signal LED |
| Mounting Hole | M3 |
| Cable Length | 20cm |
Anonymous
Mar 28, 2026
Rating: 5/5
Reliable Counting
No false triggers detected during my testing phase. Very stable output.
Anonymous
Mar 15, 2026
Rating: 4/5
Good sensor, careful alignment
Works as expected but you need to align the beam precisely. Good value.
Anonymous
Mar 12, 2026
Rating: 4/5
Solid build quality
Plastic housing is lightweight but durable. Cables could be longer.
Anonymous
Feb 26, 2026
Rating: 5/5
Perfect for Motor RPM
Used this to measure the speed of a small DC motor. The signal is clean and consistent.
Anonymous
Feb 23, 2026
Rating: 5/5
Arduino Project Success
Integrated easily with my Arduino counter project. Voltage range is flexible.
Q: What is the maximum detection frequency?
A: It supports up to 2kHz depending on the object size and speed.
Q: Is the output normally open or closed?
A: The output state changes when the beam is blocked. It is configurable via wiring.
Q: Can I use this outdoors?
A: This module is designed for indoor industrial use. It is not weatherproof.
Q: Can this run on 3.3V logic?
A: The module operates on 5-24V, but output is open collector so it interfaces with 3.3V logic easily.
Q: Does it come with mounting screws?
A: Mounting holes are M3 standard, but screws are not included in the package.