Anonymous
Apr 02, 2026
Rating: 5/5
Great for DIY Projects
Very easy to integrate with my Arduino setup. Readings are consistent and stable over time.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Computer Hardware, Monitors & Peripherals |
| Origin | - |
| Operating Voltage | 3.3V to 5V DC |
| Temperature Range | -55°C to 125°C |
| Output Signal | Analog Voltage & Digital TTL |
| Wiring Options | 3-Wire or 4-Wire Configuration |
| Sensor Type | NTC Thermistor |
| Measurement Accuracy | ±1°C (at 25°C) |
| Response Time | Approximately 0.5 Seconds |
| PCB Dimensions | 32mm x 14mm x 5mm |
| Mounting Hole Diameter | 3mm |
| Compatibility | Arduino, Raspberry Pi, PLC |
Anonymous
Apr 02, 2026
Rating: 5/5
Great for DIY Projects
Very easy to integrate with my Arduino setup. Readings are consistent and stable over time.
Anonymous
Mar 10, 2026
Rating: 5/5
Excellent Value
Bought five for a multi-zone system. All working perfectly out of the box.
Anonymous
Feb 13, 2026
Rating: 5/5
Accurate and Fast
Response time is impressive. Using it for server room monitoring and it alerts quickly.
Anonymous
Feb 12, 2026
Rating: 4/5
Solid Performance
Works well for ambient monitoring. Wiring diagram could be clearer but functionality is good.
Anonymous
Jan 28, 2026
Rating: 3/5
Good but Sensitive
Gets noisy readings if wires are too long. Otherwise okay for short distance applications.
Q: Can it trigger a relay directly?
A: The digital output can drive a transistor to switch a relay, not directly high power loads.
Q: Can I use this with 3.3V logic?
A: Yes, the module supports 3.3V to 5V input voltage ranges.
Q: What is the thread size for mounting?
A: This module is PCB mounted via holes, not threaded for pipe installation.
Q: Is the sensor waterproof?
A: The module itself is not waterproof, but the probe can be insulated for moisture protection.
Q: What library do I need?
A: No specific library is required; it uses standard analog read functions.