Anonymous
Mar 30, 2026
Rating: 4/5
Good value but needs calibration
The sensor reads consistently, but you must calibrate it with a known solution for accurate ppm readings. Good for relative measurements.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Computer Hardware, Monitors & Peripherals |
| Origin | - |
| Input Voltage | 3.3V - 5.5V DC |
| Output Signal | Analog Voltage (0-2.3V) |
| Interface Type | PH2.0-3Pin Connector |
| Operating Temperature | 0°C to 50°C |
| Probe Cable Length | 1.5 Meters |
| MCU Compatibility | Arduino, STM32, ESP8266, ESP32 |
| Probe Material | Titanium Alloy |
| Measurement Range | 0 - 1000 ppm |
| PCB Dimensions | 42mm x 32mm x 10mm |
| Package Weight | 45 Grams |
Anonymous
Mar 30, 2026
Rating: 4/5
Good value but needs calibration
The sensor reads consistently, but you must calibrate it with a known solution for accurate ppm readings. Good for relative measurements.
Anonymous
Mar 02, 2026
Rating: 5/5
Robust build quality
The probe feels sturdy and the cable is long enough for my tank setup. Signal is stable.
Anonymous
Mar 01, 2026
Rating: 5/5
Perfect for thesis work
Used this for monitoring hydroponics. Data logging was easy with an ESP32. Highly recommend.
Anonymous
Feb 06, 2026
Rating: 5/5
Great for Arduino Projects
Works perfectly with my Uno. Calibration was straightforward using the provided code examples.
Anonymous
Feb 02, 2026
Rating: 4/5
Solid sensor module
Arrived quickly. The analog output is smooth. Just remember it's not laboratory grade, but great for hobbyists.
Q: Is this waterproof?
A: The probe is waterproof, but the PCB module should not be submerged.
Q: What is the accuracy margin?
A: Typically within ±10% depending on calibration and water temperature. We recommend using a temperature sensor for compensation.
Q: Is there a library available?
A: Yes, there are several open-source libraries available on GitHub compatible with Arduino IDE.
Q: Does it come with calibration powder?
A: No, the module does not include calibration solution. You will need to purchase TDS calibration powder separately.
Q: Can I use this with 3.3V logic?
A: Yes, the module supports input voltage from 3.3V to 5.5V, making it compatible with 3.3V microcontrollers.