Anonymous
Apr 01, 2026
Rating: 3/5
Slower than expected
It works, but the response time is slower than bare sensors due to the steel casing.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Computer Hardware, Monitors & Peripherals |
| Origin | - |
| Sensor Model | DS18B20 |
| Interface Protocol | 1-Wire Digital |
| Operating Temperature | -55°C to +125°C |
| Measurement Accuracy | ±0.5°C (from -10°C to +85°C) |
| Cable Length | 1 Meter |
| Probe Diameter | 6mm |
| Probe Material | 304 Stainless Steel |
| Supply Voltage | 3.0V to 5.5V DC |
| Ingress Protection | IP68 Waterproof |
| Wiring Configuration | 3-Wire (VCC, GND, Data) |
Anonymous
Apr 01, 2026
Rating: 3/5
Slower than expected
It works, but the response time is slower than bare sensors due to the steel casing.
Anonymous
Mar 22, 2026
Rating: 5/5
Arduino compatible
Easy to integrate using the OneWire library. No issues with signal noise.
Anonymous
Mar 17, 2026
Rating: 5/5
Perfect for my hydroponics
Works flawlessly with my ESP32 setup. Waterproofing holds up well in the nutrient tank.
Anonymous
Feb 27, 2026
Rating: 4/5
Good sensor, stiff cable
Accuracy seems spot on compared to my lab thermometer. The cable is a bit stiff though.
Anonymous
Feb 09, 2026
Rating: 5/5
Durable and reliable
Been using this outdoors for months. No corrosion on the steel probe.
Q: Is the steel probe food grade safe?
A: The 304 stainless steel is generally food safe, but we recommend sealing connections for direct food contact.
Q: Do I need a pull-up resistor?
A: Yes, a 4.7k ohm pull-up resistor between VCC and Data line is required for proper operation.
Q: Can this be fully submerged?
A: Yes, the probe head is IP68 rated for full submersion, but avoid submerging the cable junction.
Q: What is the maximum cable extension length?
A: We recommend keeping extensions under 50 meters for reliable 1-Wire communication.
Q: Does this work with Raspberry Pi?
A: Yes, it is compatible with Raspberry Pi GPIO using a 4.7k pull-up resistor.