Anonymous
Apr 15, 2026
Rating: 5/5
Easy to integrate
Library support is excellent for both Arduino and Python. Got it running in less than 10 minutes. Highly recommend for beginners.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Computer Hardware, Monitors & Peripherals |
| Origin | - |
| Interface Protocol | I²C (Inter-Integrated Circuit) |
| Supply Voltage | 3.3V to 5.0V DC |
| Temperature Range | -40°C to +125°C |
| Humidity Range | 0% to 100% Relative Humidity |
| Temperature Accuracy | ±0.3°C (typical) |
| Humidity Accuracy | ±2% RH (typical) |
| Response Time | 8 seconds (typical) |
| Pinout Configuration | VCC, GND, SDA, SCL |
| Microcontroller Compatibility | Arduino, Raspberry Pi, ESP8266, ESP32 |
| Package Type | Breakout Module with Header Pins |
Anonymous
Apr 15, 2026
Rating: 5/5
Easy to integrate
Library support is excellent for both Arduino and Python. Got it running in less than 10 minutes. Highly recommend for beginners.
Anonymous
Mar 19, 2026
Rating: 5/5
Compact and reliable
Used it for a terrarium monitoring project. The small form factor fits perfectly inside the enclosure without taking up much space.
Anonymous
Mar 05, 2026
Rating: 4/5
Great value
Shipping was fast and the sensor works well within the specified voltage range. Documentation could be slightly better but overall satisfied.
Anonymous
Feb 09, 2026
Rating: 4/5
Good accuracy
Readings match my professional meter closely. Only giving 4 stars because the header pins were slightly loose upon arrival, but easy to solder.
Anonymous
Jan 22, 2026
Rating: 5/5
Perfect for my weather station
Works flawlessly with my ESP32 project. The readings are stable and the I2C connection was easy to set up using standard libraries.
Q: Can I use 5V logic levels directly?
A: Yes, the module supports a wide voltage range from 3.3V to 5V, so it is compatible with 5V logic microcontrollers.
Q: What is the default I2C address?
A: The default I2C address is typically 0x44, but please check the specific datasheet for the variant you received as it can vary.
Q: Does it need calibration before use?
A: No, each sensor is factory calibrated. You can start reading data immediately after connecting it to your microcontroller.
Q: What library should I use for Arduino?
A: We recommend the Adafruit SHT31 Library or the Sensirion Arduino Core Software, both are widely supported and easy to use.
Q: Is this sensor waterproof?
A: No, the chip itself is not waterproof. It should be used in dry environments or housed in a breathable protective enclosure.