A
Anonymous
Apr 10, 2026
Rating: 5/5
Robust design
Survived a few wiring mistakes during prototyping. Recommended for hobbyists and engineers.
Description
Tmall 14-year flagship store Risym Weixin high-quality bestseller
Reviews
Attributes
| Brand | - |
| Category | Electronic Components / Maker DIY / Computer Hardware, Monitors & Peripherals |
| Origin | - |
| Sensor Model | DS18B20 |
| Communication Protocol | 1-Wire Bus |
| Operating Voltage | 3.0V to 5.5V DC |
| Temperature Range | -55°C to +125°C |
| Accuracy | ±0.5°C (-10°C to +85°C) |
| Resolution | 9 to 12 Bit Configurable |
| PCB Dimensions | 20mm x 15mm x 5mm |
| Net Weight | 5 Grams |
| Pin Interface | VCC, GND, DATA |
| Package Contents | 1x Module, 1x Header Strip |
5 reviews
A
Anonymous
Mar 28, 2026
Rating: 3/5
Hard to find code examples
Module works but documentation is light. Had to search online for the right library examples.
A
Anonymous
Feb 27, 2026
Rating: 5/5
Accurate and fast
Tested against a calibrated thermometer. Close match and response time is reasonable for the price.
A
Anonymous
Feb 13, 2026
Rating: 5/5
Works great with STM32
Used it for a climate monitor project. Very stable readings and easy to interface with the Nucleo board.
A
Anonymous
Jan 22, 2026
Rating: 4/5
Good value
Needs external pull-up resistor sometimes depending on your setup. Otherwise works as expected.
5 FAQ
Q: Is there a library for Arduino?
A: Yes, the DallasTemperature library is commonly used with this module.
Q: Does it work with 3.3V logic?
A: Yes, it supports 3.0V to 5.5V operation safely.
Q: Can I connect multiple sensors?
A: Yes, the 1-Wire protocol supports multiple devices on one data pin.
Q: What is the response time?
A: Typically 750ms for maximum resolution conversion.
Q: Are the pins labeled clearly?
A: Yes, VCC, GND, and DATA are printed on the PCB silk screen.
