Anonymous
Mar 14, 2026
Rating: 5/5
Perfect for industrial scales
Works flawlessly with our PLC setup. The RS485 output is stable and noise-resistant over long distances.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Computer Hardware, Monitors & Peripherals |
| Origin | - |
| Output Protocol | RS485 (Modbus RTU) |
| Rated Capacity | 100 kg |
| Sensor Material | Aluminum Alloy |
| Comprehensive Error | ±0.02% F.S |
| Supply Voltage | 5V - 12V DC |
| Operating Temperature | -20°C to +60°C |
| Protection Rating | IP65 |
| Communication Baud Rate | 9600 / 19200 / 115200 bps |
| Mounting Hole Distance | 80mm x 40mm |
| Cable Length | 2 Meters Shielded Cable |
Anonymous
Mar 14, 2026
Rating: 5/5
Perfect for industrial scales
Works flawlessly with our PLC setup. The RS485 output is stable and noise-resistant over long distances.
Anonymous
Mar 07, 2026
Rating: 4/5
Good sensor, tricky calibration
Hardware is solid and readings are consistent. Calibration took some time to get right without dedicated software.
Anonymous
Feb 18, 2026
Rating: 5/5
Reliable for automation
Using this in a packaging line. Zero drift is impressive over continuous 24-hour operation cycles.
Anonymous
Jan 31, 2026
Rating: 5/5
High precision as advertised
Very stable readings even with minor vibrations in the workshop. Great value for the price point.
Anonymous
Jan 22, 2026
Rating: 3/5
Documentation needs improvement
Sensor works but the manual lacks examples for Python integration. Had to figure out Modbus registers manually.
Q: Does this work with Arduino?
A: Yes, it works via an RS485 to TTL converter module connected to the UART pins.
Q: Can I daisy chain multiple modules?
A: Yes, RS485 supports multi-drop networking up to 32 devices on the same bus.
Q: Can I use this outdoors?
A: It is IP65 rated, suitable for protected outdoor use but should not be submerged in water.
Q: Is calibration weight included?
A: No, calibration weights must be purchased separately based on your required capacity.
Q: What is the sampling rate?
A: The default update rate is 10Hz, configurable via software commands up to 100Hz.