Anonymous
Mar 11, 2026
Rating: 5/5
Fast shipping
Arrived earlier than expected. Product matches description and packaging was secure.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Computer Hardware, Monitors & Peripherals |
| Origin | - |
| Interface | I²C (2-wire) |
| Operating Voltage | 3.3V to 5.0V DC |
| Temperature Range | -40°C to +125°C |
| Humidity Range | 0% to 100% RH |
| Temperature Accuracy | ±0.3°C (typical) |
| Humidity Accuracy | ±2% RH (typical) |
| Response Time | 8 seconds (tau63%) |
| Board Dimensions | 20mm x 15mm x 3mm |
| Pinout | VCC, GND, SDA, SCL |
| Chip Compatibility | Sensirion SHT30 Compatible |
Anonymous
Mar 11, 2026
Rating: 5/5
Fast shipping
Arrived earlier than expected. Product matches description and packaging was secure.
Anonymous
Feb 07, 2026
Rating: 5/5
Great for Arduino
Works perfectly with the standard SHT30 libraries. Very precise readings right out of the box.
Anonymous
Feb 04, 2026
Rating: 5/5
Reliable data
Using it for a server room monitor. No drift observed over 2 months of continuous operation.
Anonymous
Feb 03, 2026
Rating: 3/5
Okay product
Works but sensitive to static electricity during handling. Make sure to ground yourself.
Anonymous
Feb 02, 2026
Rating: 4/5
Good value
Cheap and effective. Wish it came with headers soldered but easy enough to do myself.
Q: Does it come with headers?
A: No, headers are not included but can be soldered easily onto the PCB pads.
Q: Max cable length for I2C?
A: We recommend keeping I2C lines under 30cm for stability without pull-up adjustments.
Q: Compatible with Raspberry Pi?
A: Yes, it works directly with Raspberry Pi GPIO I2C pins using 3.3V logic.
Q: What is the sampling rate?
A: You can configure it from 0.5 Hz up to 10 Hz depending on the power mode selected.
Q: Is it waterproof?
A: No, the sensor element is not waterproof. Please use a protective breathable case.