Anonymous
Mar 30, 2026
Rating: 5/5
Easy library support
Used standard AS5600 Arduino library and it worked out of the box. Great for prototypes.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Computer Hardware, Monitors & Peripherals |
| Origin | - |
| Resolution | 14-bit (16384 steps) |
| Communication Interface | SPI, I2C, ABZ, PWM |
| Supply Voltage | 3.3V to 5.0V DC |
| Operating Temperature | -40°C to +125°C |
| Package Type | SOP-8 Chip / Breakout Module |
| Angular Accuracy | ±0.5 degrees (typical) |
| Output Latency | Less than 1ms |
| Recommended Magnet | Diametric N35-N52 (6mm diameter) |
| PCB Size | 20mm x 20mm (Module) |
| Pin Compatibility | Direct AS5600 Replacement |
Anonymous
Mar 30, 2026
Rating: 5/5
Easy library support
Used standard AS5600 Arduino library and it worked out of the box. Great for prototypes.
Anonymous
Mar 25, 2026
Rating: 4/5
Great for learning
Affordable way to learn about magnetic encoders. Documentation could be better but community helps.
Anonymous
Feb 28, 2026
Rating: 5/5
High precision confirmed
Tested against a reference encoder. Noise levels are low and response is quick enough for PID loops.
Anonymous
Feb 15, 2026
Rating: 4/5
Good value but magnet matters
Sensor works well but you must align the magnet correctly or readings jump. Once aligned, very stable.
Anonymous
Feb 06, 2026
Rating: 5/5
Perfect for servo feedback
Replaced my old potentiometers with these. The 14-bit resolution is smooth and SPI is fast.
Q: Can I daisy chain multiple sensors?
A: For SPI yes using CS pins. For I2C you need to check address configuration options on your board.
Q: Is this compatible with 5V logic Arduino Uno?
A: Yes, the module supports 3.3V to 5V input logic levels.
Q: Does it come with the magnet included?
A: This listing is for the sensor module only. Magnets are sold separately.
Q: What is the maximum rotation speed?
A: The sensor handles up to 30,000 RPM depending on your microcontroller read speed.
Q: What size magnet should I use?
A: We recommend a 6mm to 10mm diametrically magnetized rare earth magnet.