A
Anonymous
Apr 11, 2026
Rating: 5/5
Easy I2C setup
Worked with ESP32 immediately using standard libraries. No issues with connectivity.
Description
LIS3DSH Three-Axis High-Resolution Acceleration Specializing in Components for 22 Years
Reviews
Attributes
| Brand | - |
| Category | Electronic Components / Maker DIY / Computer Hardware, Monitors & Peripherals |
| Origin | - |
| Interface Protocol | I2C and SPI |
| Supply Voltage | 1.71V to 3.6V |
| Measurement Range | ±2g / ±4g / ±6g / ±8g / ±16g |
| Data Output | 16-bit digital |
| Package Type | LGA-16 on Breakout Board |
| Register Map | Compatible with LIS3DH |
| Operating Temperature | -40°C to +85°C |
| Power Consumption | 0.2mA typical |
| FIFO Buffer | 32-level depth |
| Board Size | 20mm x 15mm x 3mm |
5 reviews
A
Anonymous
Mar 30, 2026
Rating: 5/5
Great for robotics
Stable readings and easy to integrate into my rover project. Highly recommended for beginners.
A
Anonymous
Mar 03, 2026
Rating: 5/5
High precision
Noise levels are low and the 16-bit resolution provides smooth data for analysis.
A
Anonymous
Feb 13, 2026
Rating: 3/5
Voltage warning
Works fine but remember it uses 3.3V logic. I had to add a level shifter for my 5V Arduino.
A
Anonymous
Feb 06, 2026
Rating: 4/5
Good value
Sensor works well but the pinout diagram on the back could be clearer for first-time users.
5 FAQ
Q: Are the headers pre-soldered?
A: No, the male headers are included in the package but are not soldered to the board.
Q: Is this module 5V logic safe?
A: No, the logic levels are 3.3V. Please use a level shifter if connecting to a 5V microcontroller.
Q: What is the maximum sampling rate?
A: The typical maximum sampling rate is around 3.2 kHz depending on configuration.
Q: Does it work with Adafruit libraries?
A: Yes, since it is register compatible, the Adafruit LIS3DH library usually works well.
Q: What is the default I2C address?
A: The default I2C address is 0x19. It can be changed via the SA0 pin.
