Anonymous
Apr 05, 2026
Rating: 4/5
Easy to wire
Clear pinout. Just make sure to calibrate the pot for your specific surface.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Computer Hardware, Monitors & Peripherals |
| Origin | - |
| Operating Voltage | 3.3V - 5V DC |
| Detection Range | 2cm - 30cm (Adjustable) |
| Output Signal | Digital TTL (High/Low) |
| Comparator Chip | LM393 |
| Indicator LED | Power & Output Status |
| PCB Dimensions | 32mm x 14mm |
| Mounting Hole | 3mm Diameter |
| Operating Temperature | -10°C to +50°C |
| Current Consumption | < 30mA |
| Interface | 3-Pin Header (VCC, GND, OUT) |
Anonymous
Apr 05, 2026
Rating: 4/5
Easy to wire
Clear pinout. Just make sure to calibrate the pot for your specific surface.
Anonymous
Mar 23, 2026
Rating: 5/5
Great for Arduino Robots
Works perfectly with my Uno. Easy to adjust sensitivity with the potentiometer.
Anonymous
Mar 10, 2026
Rating: 5/5
Reliable Detection
Consistent performance in indoor lighting conditions. Highly recommend for beginners.
Anonymous
Feb 08, 2026
Rating: 4/5
Good value pack
Bought five for a project. One was slightly less sensitive but still usable.
Anonymous
Jan 24, 2026
Rating: 5/5
Compact and Effective
Small size fits well on my chassis. Detection range is accurate as described.
Q: What is the pinout order?
A: Typically VCC, GND, OUT but please check the silkscreen on your board.
Q: Can I use this outdoors in sunlight?
A: Strong sunlight may interfere with IR sensors; indoor use is recommended.
Q: Is the output analog or digital?
A: This module provides a digital TTL output.
Q: Can this work with 3.3V logic?
A: Yes, it operates between 3.3V and 5V.
Q: How do I adjust the detection distance?
A: Use the blue potentiometer on the board to tune sensitivity.