Anonymous
Mar 10, 2026
Rating: 5/5
Easy Modbus setup
Documentation was clear. Got it running in minutes with my PLC. Highly recommend for automation.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Computer Hardware, Monitors & Peripherals |
| Origin | - |
| Communication Protocol | RS485 (Modbus RTU) |
| Measurement Range | 0 to 200,000 Lux |
| Supply Voltage | DC 10V to 30V |
| Operating Temperature | -40°C to +85°C |
| Accuracy | ±5% at 25°C |
| Protection Rating | IP65 Waterproof |
| Housing Material | Industrial Grade ABS |
| Cable Length | 2 Meters Shielded Cable |
| Response Time | Less than 1 Second |
| Weight | 150 Grams |
Anonymous
Mar 10, 2026
Rating: 5/5
Easy Modbus setup
Documentation was clear. Got it running in minutes with my PLC. Highly recommend for automation.
Anonymous
Mar 07, 2026
Rating: 4/5
Good but cable short
Sensor works great, but I needed to extend the cable for my specific setup. Otherwise functionality is solid.
Anonymous
Mar 06, 2026
Rating: 5/5
Accurate lux monitoring
Compared against a handheld meter, very close match. Great for logging environmental data.
Anonymous
Feb 27, 2026
Rating: 5/5
Reliable industrial sensor
We deployed ten units across our facility. No failures so far and data consistency is excellent.
Anonymous
Feb 21, 2026
Rating: 5/5
Perfect for my smart greenhouse
Integrated easily with my controller. Readings are stable even under direct sunlight. Very satisfied with the performance.
Q: Is it suitable for outdoor weather stations?
A: Yes, IP65 rating protects against rain and dust making it suitable for outdoor use.
Q: What is the default baud rate?
A: Default is 9600bps, but it is configurable via software commands.
Q: Does it require external calibration?
A: No, the unit is factory calibrated before shipping and ready to use.
Q: Can I connect multiple sensors on one bus?
A: Yes, supports multi-drop networking allowing multiple devices on the same RS485 line.
Q: Is there a digital display on the unit?
A: No, data is transmitted via RS485 only. You will need a host device to view readings.