Anonymous
Mar 28, 2026
Rating: 5/5
Great for Arduino projects
Works flawlessly with my Uno. The UART output makes it much easier than raw I2C registers. Angles are stable after calibration.
Description
Reviews
| Brand | - |
| Category | Electronic Components / Maker DIY / Computer Hardware, Monitors & Peripherals |
| Origin | - |
| Interface Type | UART / I²C |
| Degrees of Freedom | 6-DOF (3-Axis Gyro + 3-Axis Accel) |
| Operating Voltage | 3.3V - 5V DC |
| Gyroscope Range | ±2000°/s |
| Accelerometer Range | ±16g |
| Data Output | Angle, Acceleration, Angular Velocity |
| Module Size | 22mm x 17mm x 3mm |
| Net Weight | 4.5g |
| Operating Temperature | -40°C to 85°C |
| Mounting Hole | 4x M2.5 |
Anonymous
Mar 28, 2026
Rating: 5/5
Great for Arduino projects
Works flawlessly with my Uno. The UART output makes it much easier than raw I2C registers. Angles are stable after calibration.
Anonymous
Mar 12, 2026
Rating: 5/5
Solid sensor module
Reliable data output. The tilt angle calculation onboard saves processing power on the main MCU. Recommended.
Anonymous
Mar 09, 2026
Rating: 4/5
Arrived safely
Packaging was secure. Module looks genuine. Tested basic functions and all axes respond correctly.
Anonymous
Feb 20, 2026
Rating: 5/5
Easy to integrate
Documentation could be better but found sample code online. Plug and play with STM32. Very happy with the purchase.
Anonymous
Jan 21, 2026
Rating: 4/5
Good accuracy, slight drift
Used this for a camera gimbal. Accuracy is good for the price. Noticed slight drift over long periods but acceptable for hobby use.
Q: What is the update rate?
A: The default output frequency is 100Hz, configurable up to 200Hz.
Q: Does it come with example code?
A: Yes, we provide a download link for Arduino and STM32 libraries in the manual.
Q: Is this compatible with 5V logic?
A: Yes, the module supports 3.3V to 5V input voltage.
Q: How do I calibrate the zero angle?
A: Keep the module stationary on a flat surface and send the calibration command via UART.
Q: Can I use this underwater?
A: No, this module is not waterproof and should be used in dry environments only.